Norfolk · England
Bath Repair in Fishley
Damaged bath in Fishley? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Impact holes in acrylic
- A failed DIY repair that’s discoloured or lifting
About our bath repair in Fishley
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on roll-top & freestanding, whirlpool & spa baths and cast iron enamel, and common reasons people get in touch are cracks in an acrylic bath and a failed DIY repair that’s discoloured or lifting.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Fishley (NR13)
- County
- Norfolk
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the day after, the bath is ready to use.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Clear the area around the damage
- Make sure the room can be ventilated
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- If an acrylic bath flexes, have its feet adjusted
- Fix dripping taps early to stop staining and limescale
- Don’t leave razors or cans standing in the bath
- Have new chips seen to early
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
How we price bath repair
Repairs from £95. You will not pay by the hour. The price is based on:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- The material and finish
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
How to get a fixed quote
When you take your photos, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- A photo taken from further back
- One sharp close-up of the damage
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
About Fishley
Fishley is about 7 miles west of Caister-on-Sea, in Norfolk. From the centre of Fishley to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover 797 places across Norfolk.
Our repair technicians cover all of the NR13 postcode area and the streets around it. From Pyebush Lane, Englands Road and South Walsham Road or a nearby road, a technician can come to you. If you’re just outside Fishley, we cover Acle (1 mile south), Upton (1 mile north), Damgate (1 mile south), Pilson Green (2 miles north-west) and Billockby (2 miles north-east). We also work in nearby towns such as Norwich (11 miles west), Great Yarmouth (8 miles east), Gorleston-on-Sea (9 miles south-east), Sprowston (9 miles west), Thorpe St Andrew (8 miles west) and North Walsham (14 miles north-west).
Around Fishley
In Fishley, that means homes near Acle Academy, Church of St Mary and Acle St Edmund Voluntary Controlled Primary School, among other places. Fishley’s nearest station is Acle station, roughly 0.9 miles south of the centre. Further afield, we also cover the area around Wind Energy Museum (3.7 miles north). Green spaces nearby include South Walsham Broad and Ranworth Broad.
Also near Fishley
Other services in Fishley
What we’re called out for in Fishley
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
You may need us if you’ve spotted:
- Chips caused by builders
- Deep scratches in acrylic
- A hole punched through by something heavy
- A chip where the taps sit
What your quote should include
- What happens if they find more damage
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
- Whether they match the colour on site
Common questions in Fishley
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Is a bath repair durable?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Do you cover the whole of Norfolk?
All of Norfolk, and the rest of the UK. There is no extra charge for travel.
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
What we can’t put right
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
- Leaking fittings, which need a plumber
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
