Warwickshire · England
Bath chip & crack repair in Flecknoe, Warwickshire
Local bath repair for Flecknoe: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Scuffs and scratches in the surface
- Snagging damage from a refit
How we handle bath repair in Flecknoe
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We are often asked to fix scratches you can feel with a fingernail and a hole punched through by something heavy, on whirlpool & spa baths, pressed steel enamel and cast iron enamel.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Flecknoe (CV23)
- Area hub
- Warwickshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Landlords, letting agents and housing providers in Flecknoe use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
When a repair is not the answer
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
- Wear across the whole surface, which needs re-enamelling
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Questions from Flecknoe
Can you quote from pictures?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Is a holed acrylic bath repairable?
Usually. Photos of the hole and the underside help us check.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
How to look after the repair
To keep it looking its best:
- Do not scrub with anything abrasive
- Do not leave a fresh chip for long
- Check that an acrylic bath doesn’t move when you stand in it
- Don’t leave razors or cans standing in the bath
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
Common problems we fix in Flecknoe
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
People generally call us after spotting something like this:
- Damage done while the bathroom was being fitted
- A chip where the taps sit
- Hairline or through cracks in acrylic
- Rusty patches near the plughole
Comparing quotes
- How to care for the finish
- Whether they match the colour on site
- How changes to the job are handled
- How soon you can use it again
Places near Flecknoe
Other services in Flecknoe
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Flecknoe and nearby
Flecknoe is about 3 miles west of Daventry, in Warwickshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Flecknoe is one of 324 towns and villages in Warwickshire where we work. We work right across the region, from Flecknoe to Birmingham (about 31 miles away).
All of CV23 is covered, from the main roads to the quietest streets. Whether you live on Vicarage Road and Bush Hill Lane or a nearby road, we can come to you. If you are just outside Flecknoe, we cover Upper Shuckburgh (1 mile south-west), Staverton (2 miles south-east), Grandborough (2 miles north-west), Braunston (2 miles north-east) and Hellidon (3 miles south). Larger places within reach include Rugby (7 miles north), Warwick (14 miles west), Royal Leamington Spa (12 miles west), Leamington Spa (12 miles west), Kenilworth (15 miles west) and Southam (6 miles west).
Near you in Flecknoe
Around Flecknoe, we work in homes near St Mark, among other places. Well-known places in the area include Daventry Museum (3.8 miles east). Green spaces nearby include Badby Wood and Arbury Hill.
The process
You do not need to empty the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. It typically takes a morning or an afternoon, and you can get on with other things while we are there.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the next day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
Advice
Prices and what affects them
Prices start from £95. We do not charge extra for travel to Flecknoe. The price comes down to:
- Any earlier repairs that need removing first
- The material
- The colour and finish to match
- The type of damage
Our prices are the same across the UK, with no extra for Flecknoe. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- Whether it’s been repaired or coated before
- The material, if you know it
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
Email us photos of the damage and a wider shot of the whole item, and tell us you are in Flecknoe, and we will reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
