Greater London · England

Bath chip & crack repair in Fortune Green, Greater London

We travel to Fortune Green for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • Rust by the waste and overflow
  • Holes from dropped items
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Fortune Green

Bath repair in Fortune Green, done in place

Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in a single visit. Typical jobs include chips along the edge of the bath and impact holes in acrylic, in pressed steel enamel, whirlpool & spa baths and roll-top & freestanding.

You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.

Area
Fortune Green (NW3, NW6, NW2)
Region
Greater London
Guarantee
One year on every repair
Quotes
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

Aftercare tips

Simple care helps the repair last. We recommend:

  • Keep metal cans and razors off the surface
  • Rinse the bath after use, especially in hard water areas
  • Put a towel in the bath if you’re working above it
  • Check that an acrylic bath doesn’t move when you stand in it

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.

What a repair cannot fix

Not everything can be repaired, and we’ll tell you before we start. We cannot fix:

  • Leaking fittings, which need a plumber
  • A bath that moves underfoot, until its support is fixed
  • Cracks in acrylic we cannot reach from underneath

If in doubt, send pictures and we’ll say what we think.

What we work on

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel

Can I fix it myself?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

How it works

Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take a morning or an afternoon, and the room is left clean and tidy.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

Before we arrive

  • Ensure the room can be ventilated
  • Let us know if it has been repaired before
  • Move bottles, mats and clutter away from the area

How to get a price

For a price in Fortune Green, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Get a free quote

Read more

Why repair rather than replace?

People often assume a cracked or chipped bath has to come out. Typically it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Prices start from £95. We charge the same wherever you are, so there is no premium for Fortune Green. The job itself decides the price: the material, the amount of damage and how many items.

Why Fortune Green customers choose us

  • No extra charge for your area
  • A fixed quote before booking
  • One-year guarantee on every repair
  • Rooms protected and left tidy

Take a look at our pricing or guide to resurfacing and replacement costs.

What bath repair costs

Prices start from £95. Every quote is fixed and free. What we take into account:

  • Whether it’s a chip, crack, burn or wear
  • Whether we combine several jobs
  • Previous DIY repairs that have to come out
  • The material and finish

The price reflects the work involved, not your postcode. You’ll see the full price before booking.

Send photos for a quote

Two or three clear pictures are typically enough. It helps if you send:

  • Daylight if possible, and no flash reflection
  • Whether it’s been repaired or coated before
  • A picture taken from further back
  • A coin or ruler next to the damage for scale

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Signs you need bath repair in Fortune Green

Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.

The things customers typically mention when they call are:

  • Rust spots around the plughole
  • Hairline or through cracks in acrylic
  • Chips under the taps
  • Impact holes in acrylic

Before you book anyone

  • How long the guarantee is and what it covers
  • When it can be used again
  • Who will actually do the work
  • What prep work is covered

Our hiring checklist

Our work in Fortune Green

Fortune Green is about 1 mile west of Hampstead, in Greater London. Wherever you are in the NW3 postcode area, we come to you. Our repair technicians cover all 764 towns and villages across Greater London, from the larger towns to small villages. Our jobs stretch from Fortune Green to London (6 miles away).

We cover every part of the NW3, NW6 and NW2 postcode area and the streets around it. Local streets include Mill Lane, Ajax Road and Sarre Road. If you’re just outside Fortune Green, we cover West Hampstead (1 mile east), Childs Hill (1 mile north), Hampstead (1 mile east), Greenhill (1 mile east) and Vale of Health (1 mile north-east). Further out, we also cover London (6 miles south-east), City of Westminster (3 miles south-east), Marylebone (3 miles south-east), Kensington (4 miles south), St Pancras (4 miles south-east) and Shoreditch (5 miles east).

What’s near Fortune Green

Locally, our jobs take us to homes close to Holly Bush pub, Kilburn Grange Park and St Vedasts School For Boys. Also close by are Church of St Luke (less than half a mile north), St Luke's Church of England School (less than half a mile north) and Hampstead School (0.5 miles west). Fortune Green’s nearest station is West Hampstead Thameslink station, roughly 0.5 miles south. A little further out are Isokon Gallery (1.4 miles east) and Frognal and Fitzjohns (less than half a mile east). Not far away are The Long Water and Westbere Copse.

Map of Fortune Green © OpenStreetMap contributors

Your questions about bath repair in Fortune Green

Can you repair a crack in an acrylic bath?

Generally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

How much does bath repair cost in Fortune Green?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.

Will the repair show?

On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

Can you redo someone else’s repair?

Most of the time. Let us know what was used before.

Can you redo an old repair?

Yes. We remove the old filler and start again. Tell us about it when you send pictures.

What about rust by the waste?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

What if the damage is worse than the pictures show?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.