Northumberland · England
Bath chip & crack repair in Foulden, Northumberland
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Foulden, with a one-year guarantee on every repair.
- Repairs from £95
- Damage beneath the taps
- A kit repair that didn’t last
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Bath repair in Foulden without replacing anything
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We work on pressed steel enamel, cast iron enamel and roll-top & freestanding, and people most often call us about snagging damage from a refit and cracks in an acrylic bath.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Area
- Foulden (TD15)
- Area hub
- Northumberland
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Foulden
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
For anyone letting property in or around Foulden, we’ll quote for several properties at once. Send photos for each one and we’ll price them together.
The process
Here’s how a visit generally runs: we arrive on time, protect everything around the work area, do the job and tidy away. Plan for two to three hours for most chips. Before we go, we’ll explain when it can be used and how to care for it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
- Make sure the area is dry
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Related advice
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Common problems we fix in Foulden
Glass and heavy bottles cause more chips than anything else. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
If you can see any of these, send us a picture:
- Damage beneath the taps
- A hole punched through by something heavy
- Chips caused by builders
- Scratches you can feel with a fingernail
What to look for in a quote
- Who turns up on the day
- A fixed price, and whether VAT is included
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
What affects the price in Foulden
Repairs from £95. We charge the same across the UK, including Foulden. The price reflects:
- Whether we combine several jobs
- The size and number of damaged areas
- The material
- How hard the colour is to match
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- A wider photo showing the whole bath
- A clear, close picture of the problem area
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Foulden and nearby
Foulden is about 4 miles north-west of Berwick-upon-Tweed, in Northumberland. Whether you are in the middle of Foulden or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Foulden is one of 189 towns and villages in Northumberland where we work. You can also see our page for Edinburgh, about 44 miles away.
Postcode districts we cover here: TD15. We also travel to Paxton (2 miles south), Hutton (2 miles south-west), Horncliffe (3 miles south), Ayton (4 miles north) and Burnmouth (4 miles north). Further out, we also cover Berwick-upon-Tweed (4 miles south-east), Coldstream (11 miles south-west), East Ord (4 miles south-east) and Spittal (5 miles south-east).
Around Foulden
Around Foulden, we work in homes near Foulden Parish Church, among other places. Foulden’s nearest station is Berwick-Upon-Tweed station, roughly 3.9 miles east of the centre. A little further out are Berwick Infirmary (4.1 miles east) and Chain Bridge Honey Farm (3 miles south). Not far away are Halidon Hill.
When we would advise against a repair
It helps to know what we cannot do too:
- A bath worn all over, where resurfacing makes more sense
- A steel bath rusted through
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Repairing versus replacing in Foulden
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. Repairing it leaves it where it is. Prices start from £95. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your photos
- Straight answers about what a repair can do
- Repair technicians who travel to you, UK-wide
See our prices page and resurfacing vs replacement cost guide.
Foulden: your questions answered
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Do you cover the entire of Northumberland?
The whole UK, including all of Northumberland. Just include your postcode and we’ll confirm dates.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
How do I book?
Use the quote form or ring 0345 017 0787.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Nearby places to Foulden
More services for Foulden
About our accreditations · Every repair comes with a one-year guarantee.
