Oxfordshire · England
Bath Repair in Freeland
Local bath repair for Freeland: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- A chip where the taps sit
Aftercare tips
After the repair has cured, a few habits help it last:
- Do not scrub with anything abrasive
- If an acrylic bath flexes, have its feet adjusted
- Protect the bath with a towel when doing jobs nearby
- Don’t leave a fresh chip for long
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Bath repair in Freeland without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. We work on roll-top & freestanding, acrylic and whirlpool & spa baths, and common reasons people contact us are an old repair that has yellowed or come loose and rusty patches near the plughole.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Area
- Freeland (OX29)
- County
- Oxfordshire
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Freeland
More services for Freeland
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes two to three hours for most chips. Before we leave, we explain the curing time and the aftercare.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the day after.
Getting ready for the visit
- Ensure the area is dry
- Move bottles, mats and clutter away from the area
- Tell us about parking, stairs or access
How to get a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
When a repair is not the answer
A repair isn’t always the answer, and we would rather say so up front. Repairs won’t solve:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we can’t get to from below
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Freeland and nearby
Freeland is about 4 miles north-east of Witney, in Oxfordshire. Whether you are in the middle of Freeland or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover 443 places in Oxfordshire. You can also see our page for Birmingham, about 50 miles away.
Here we cover the OX29 postcode area. You’ll find streets such as Hurst Lane, Nash Lane and Wroslyn Road, all of which we cover. Neighbouring places we cover include East End (1 mile north-west), North Leigh (2 miles west), Combe (2 miles north), New Yatt (2 miles west) and Stonesfield (3 miles north). Larger places within reach include Oxford (9 miles south-east), Bicester (12 miles north-east), Abingdon-on-Thames (11 miles south-east), Witney (4 miles south-west), Carterton (9 miles west) and Wantage (15 miles south).
What’s near Freeland
Typical jobs here are in homes near The Oxfordshire Yeoman pub, Bartholomew School and Church of St Mary, among other places. Freeland’s nearest station is Combe station, roughly 1.3 miles north of the centre. A little further out are Morris Motors Museum (1.5 miles north-east). Green spaces nearby include Blenheim Farm.
Prices and what affects them
Repairs from £95. There’s no charge for travel to Freeland. The price comes down to:
- How much damage there is
- Previous DIY repairs that have to come out
- The material
- What kind of damage it is
Our prices are the same across the UK, so there’s no premium for Freeland. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
When you take your photos, these tips help us give you a firm price:
- Any earlier repairs or coatings
- A photo taken from further back
- Any details about the material
- A coin or ruler next to the damage for scale
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll say right away if a repair is the right fix.
Landlords, agents and businesses in Freeland
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Send the address, pictures and access details.
Repair or replace: which is better?
Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- One visit for most repairs
- Nothing taken out or refitted
- Honest advice, even when it means no job
Take a look at our full price list and bath cost comparison.
Your questions about bath repair in Freeland
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
When can I have a bath again?
Normally by the following day, though it depends on what we’ve done.
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
About our accreditations · Every repair comes with a one-year guarantee.
