Hertfordshire · England
Bath Repair for Friar's Wash homes
Fixed-price bath repair in Friar's Wash and the surrounding area, usually in one visit.
- Repairs from £95
- Rust spots around the plughole
- Hairline or through cracks in acrylic
About our bath repair in Friar's Wash
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our technicians work on acrylic, cast iron enamel and whirlpool & spa baths, and common reasons people contact us are cracks in an acrylic bath and damage done while the bathroom was being fitted.
A one-year guarantee comes as standard.
- Location
- Friar's Wash (AL3)
- County
- Hertfordshire
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Common problems we fix in Friar's Wash
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
Look out for these signs:
- Chips caused by builders
- Damage beneath the taps
- Rust spots around the plughole
- Hairline or through cracks in acrylic
Comparing quotes
- What aftercare is recommended
- The length of the guarantee and what it covers
- What preparation is included
- Is the price fixed, and does it include VAT?
Your questions about bath repair in Friar's Wash
Are there extra charges for Friar's Wash?
Travel is included in the price, and we charge the same wherever you are.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Friar's Wash.
Can a cracked acrylic bath be fixed?
Typically, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
What affects the price in Friar's Wash
Repairs from £95. There’s no area surcharge for Friar's Wash. What changes the price is:
- Doing more than one item at once
- The material
- Any earlier repairs that need removing first
- Unusual colours or finishes
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.
Quotes from your photos
We price nearly every job from photos. This is what to send:
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- What it’s made of, if you know
- A clear, close picture of the problem area
Upload a photo of the damage and a wider shot of the whole item, with your AL3 postcode, and we will reply with a fixed price.
Nearby places to Friar's Wash
More services for Friar's Wash
How it works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes two to three hours for most chips. Before we leave, we explain how soon it can be used and how to care for it.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Make sure the area is dry
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
How to get a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Read more
Honest limits
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Cracks in parts of an acrylic bath we can’t get to from below
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we will say what we think.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Don’t leave razors or cans standing in the bath
- Get a dripping tap fixed promptly
- Clean with warm water and a mild detergent
- Do not leave a fresh chip for long
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Covering Friar's Wash
Friar's Wash is about 3 miles west of Harpenden, in Hertfordshire. Wherever you are in the AL3 postcode area, a technician comes to you. We work in 381 places in Hertfordshire, from the larger towns to small villages. You can also see our page for London, about 27 miles away.
We cover every part of the AL3 postcode area and the streets around it. Whether you live on London Road, Chequers Hill and Old Watling Street or anywhere nearby, a technician can come to you. Close by, we cover Flamstead (1 mile south-west), Trowley Bottom (1 mile south-west), Markyate (2 miles north-west), Pepperstock (2 miles north) and Slip End (2 miles north). Within a short drive, we also cover Watford (11 miles south), Hemel Hempstead (5 miles south), Stevenage (12 miles north-east), St Albans (7 miles south-east), Welwyn Garden City (10 miles east) and Harpenden (3 miles east).
Near you in Friar's Wash
Our clients here include homes close to Roundwood Park School, Chequers pub and Church of St Leonard, among other places. The closest station to Friar's Wash is Harpenden station, about 3.2 miles east. Well-known places in the area include Luton Castle (3.5 miles north) and Redbourn Museum (2.3 miles south-east). Green spaces nearby include Landpark Wood.
Why repair rather than replace?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Work done at your home or business
- Rooms protected and left tidy
- One-year guarantee on every repair
- Nothing taken out or refitted
See our full price list or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
