Hertfordshire · England
Bath chip & crack repair in Markyate, Hertfordshire
We travel to Markyate for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Prices start from £95. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why us?
- CHAS and Constructionline accredited
- A year’s guarantee on all work
- Usually one visit, start to finish
- Work done at your home or business
Read our pricing or resurfacing vs replacement cost guide.
Bath repair in Markyate, done in place
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. We’re frequently asked to fix scratches you can feel with a fingernail and a hole punched through by something heavy, across roll-top & freestanding, acrylic and pressed steel enamel.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Markyate (AL3)
- Area hub
- Hertfordshire
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £95. Prices are worked out job by job, from your pictures. What matters most is:
- What kind of damage it is
- The colour and finish to match
- Any earlier repairs that need removing first
- Whether we combine several jobs
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
Good pictures mean an accurate price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
- A close-up of the damage, in focus
- Any details about the material
To get a price, send two or three pictures using our quote form or ring us. We will say immediately if a repair is the right fix.
Do you need bath repair in Markyate?
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
These are the problems we are asked about most:
- Damage done while the bathroom was being fitted
- A hole punched through by something heavy
- Rust spots around the plughole
- An old repair that has yellowed or come loose
Before you book anyone
- How soon you can use it again
- What happens if they find more damage
- Whether there are any call-out or travel charges
- How the room is protected while they work
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What we do, step by step
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, depending on the damage, and the room is left clean and tidy.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can normally use the bath the day after.
How to prepare
- Have a window or extractor fan available
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
How to get a price
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
About Markyate
Markyate is about 4 miles south-east of Dunstable, in Hertfordshire. We visit customers in Markyate and the surrounding area, so nothing has to leave your home. We cover 381 places across Hertfordshire. Our jobs stretch from Markyate to London (28 miles away).
Jobs in AL3 are booked in the same way as anywhere else. From High Street, London Road and Sebright Road or a nearby road, we can come to you. We also cover the places around Markyate: Roe End (1 mile south-west), Aley Green (1 mile north-east), Flamstead (2 miles south-east), Pepperstock (2 miles north-east) and Friar's Wash (2 miles south-east). We also work in nearby towns such as Watford (12 miles south), Hemel Hempstead (6 miles south), Stevenage (13 miles north-east), St Albans (8 miles south-east), Welwyn Garden City (12 miles east) and Harpenden (5 miles east).
Landmarks near Markyate
Around Markyate, we work in homes near The Local pub, Markyate Methodist Church and Markyate Village School and Nursery. Markyate’s nearest station is Luton Airport Parkway station, about 3.8 miles north-east. Other landmarks nearby include Mossman Collection (2.6 miles north-east) and Luton Castle (3.3 miles north-east). Green spaces nearby include Landpark Wood.
FAQs for Markyate
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is a bath repair permanent?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How do I get a price for bath repair in Markyate?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Towns and villages near Markyate
Also in Markyate
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Landlord and trade work in Markyate
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Looking after it afterwards
How the surface is treated afterwards matters:
- Give the bath a quick rinse after use
- Clean with warm water and a mild detergent
- Put a towel in the bath if you are working above it
- Avoid scourers, wire wool and gritty cream cleaners
There is nothing special to do after a repair. Avoid bleach-based and gritty cleaners.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
About our accreditations · Every repair comes with a one-year guarantee.
