Slough · England
Bath Repair in Fulmer
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Fulmer and across Slough. Free, fixed quotes from your pictures.
- Repairs from £95
- Chips under the taps
- Chips on the rim or sides
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
About our bath repair in Fulmer
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. If you are dealing with a cracked acrylic bath and an old repair that has yellowed or come loose, we can usually put it right, whatever the material.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Fulmer (SL3)
- Area hub
- Slough
- Cover
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Fulmer
Fulmer is about 4 miles north-east of Slough, in Slough. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Fulmer is one of 31 places in Slough where we work. You can also see our page for London, about 20 miles away.
All of SL3 is covered, from the main roads to the quietest streets. We regularly work on streets such as Fulmer Road, Alderbourne Lane and Hay Lane. Nearby, we also work in Tatling End (1 mile north-east), Wexham Street (1 mile south-west), Gerrards Cross (1 mile north), Stoke Poges (2 miles south-west) and Rush Green (2 miles east). Further out, we also cover Slough (4 miles south-west), Cippenham (5 miles south-west), Chalvey (4 miles south-west), Britwell (3 miles south-west), Langley (4 miles south) and Upton (4 miles south).
Around Fulmer
We visit homes around Church of St James, Bulstrode Park and Khalsa Secondary Academy and the streets around them. Other local landmarks include The Black Horse Public House (under half a mile south-west) and Fulmer Infant School (under half a mile south). The closest station to Fulmer is Gerrards Cross station, roughly 1.9 miles north. Other landmarks nearby include British Airways Heritage Collection (3.5 miles south-east) and Wexham Park Hospital (2.2 miles south). Open spaces near Fulmer include Horse Shoe Bay and Stoke Common.
Prices and what affects them
Repairs from £95. Each job gets its own fixed price. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Most quotes are done from pictures alone. To make it quick:
- One picture of the whole bath
- Any details about the material
- Details of any past repairs
- Something in shot to show the size
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Also in Fulmer
How to look after the repair
Aftercare is simple:
- Fix dripping taps early to stop staining and limescale
- Do not scrub with anything abrasive
- Clean with warm water and a mild detergent
- Protect the bath with a towel when doing jobs nearby
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
When a repair isn’t the answer
A repair is not right for every job, including:
- A bath worn all over, where resurfacing makes more sense
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Fulmer
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which generally takes a morning or an afternoon. If we find something your photos didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the next day.
Preparing for the visit
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
- Let us know about parking or access
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
Should you replace it?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- A fixed quote before you book
- Repair technicians who travel to you, UK-wide
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
Read our pricing or guide to resurfacing and replacement costs.
Do you need bath repair in Fulmer?
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Most people get in touch when they notice one of these:
- Chips under the taps
- A failed DIY repair that’s discoloured or lifting
- A cracked acrylic bath
- Rust by the waste and overflow
Comparing quotes
- What preparation is included
- Who turns up on the day
- If travel is included in the price
- Whether the price is fixed and includes VAT
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Common questions in Fulmer
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
What does bath repair cost?
Repairs from £95. Every job gets a fixed price from your pictures. Send a close-up and a picture of the whole item with your SL3 postcode.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
What happens next?
You get a fixed price and available dates. If we need another angle, we’ll ask.
About our accreditations · Every repair comes with a one-year guarantee.
