Slough · England

Non-Slip Bath Coating for Fulmer homes

Local non-slip bath coating for Fulmer: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Fulmer

How it works

Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and the room is left clean and tidy.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Keep a parking space free if you can
  • Keep children and pets away from the room on the day
  • Let us know which floor the room is on

Ask for a price

To get a price, send two or three photos through our quote form or call us. We will tell you honestly whether it can be repaired.

Get a free quote

Related advice

Non-slip bath coating in Fulmer without replacing anything

It’s popular with older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We’re frequently asked to fix worn-out textured areas and safety for older or less mobile people, on acrylic baths, enamelled baths and resurfaced baths.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Location
Fulmer (SL3)
Region
Slough
Guarantee
12 months on all our work
Quote
Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Landlord and trade work in Fulmer

We work for landlords, letting agents and housing providers in Fulmer as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

Questions from Fulmer

Will the price change on the day?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

How do I book?

Use the quote form or ring 0345 017 0787.

What happens after I send pictures?

We review the pictures and send a fixed quote.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Is repairing better than replacing?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

How do I get a price for non-slip bath coating in Fulmer?

Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Common problems we fix in Fulmer

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Typical reasons for a call-out include:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

Before you book anyone

  • Whether cleaning and preparation are in the price
  • Whether the price covers travel
  • How to care for the finish
  • What the guarantee covers, and for how long

How to compare quotes

How we price non-slip bath coating

Every quote is fixed and free. What we look at:

  • Whether we combine several jobs
  • The type of damage
  • How much damage there is
  • Unusual colours or finishes

The price reflects the work involved, not where you live. You’ll see the full price before you book, with nothing added on the day.

Send photos for a quote

Before you send photos, these tips help us give you a firm price:

  • What it’s made of, if you know
  • Any earlier repairs or coatings
  • One picture of the whole bath or shower tray
  • Natural light rather than flash

You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

What we cannot put right

We will not take on work that will not last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays

Repair or replace in Fulmer?

The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why us?

  • Straight answers about what a repair can do
  • CHAS and Constructionline accredited
  • Free fixed quotes from pictures
  • One-year guarantee on every repair

See our prices page.

About Fulmer

Fulmer is about 4 miles north-east of Slough, in Slough. Customers in Fulmer get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Fulmer is one of 31 places in Slough we cover. Our nearest city page is London, about 20 miles away.

Postcode districts we cover here: SL3. Jobs here include addresses on Fulmer Road, Alderbourne Lane and Hay Lane. If you are just outside Fulmer, we cover Tatling End (1 mile north-east), Wexham Street (1 mile south-west), Gerrards Cross (1 mile north), Stoke Poges (2 miles south-west) and Rush Green (2 miles east). Within a short drive, we also cover Slough (4 miles south-west), Cippenham (5 miles south-west), Chalvey (4 miles south-west), Britwell (3 miles south-west), Langley (4 miles south) and Upton (4 miles south).

Landmarks near Fulmer

In Fulmer, that means homes near Church of St James, Bulstrode Park and Khalsa Secondary Academy. You’ll also find The Black Horse Public House (under half a mile south-west) and Fulmer Infant School (within half a mile south). For rail, the closest station is Gerrards Cross station, roughly 1.9 miles north. Well-known places in the area include British Airways Heritage Collection (3.5 miles south-east) and Wexham Park Hospital (2.2 miles south). For a walk, there’s Horse Shoe Bay and Stoke Common.

Map of Fulmer © OpenStreetMap contributors

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.