Hertfordshire · England
Bath Repair for Furneux Pelham homes
Bath repair across Furneux Pelham and nearby, done in a single visit in most cases.
- Repairs from £95
- Chips on the rim or sides
- Scuffs and scratches in the surface
What we are called out for in Furneux Pelham
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
If you can see any of these, send us a picture:
- Impact holes in acrylic
- Rusty patches near the plughole
- A kit repair that didn’t last
- Snagging damage from a refit
What your quote should include
- How changes to the job are handled
- How long it needs to cure
- Whether they match the colour on site
- What prep work is covered
How we handle bath repair in Furneux Pelham
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Whether it’s a kit repair that didn’t last and chips on the rim or sides, we can help, whatever the material.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Furneux Pelham (SG9)
- Area hub
- Hertfordshire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Furneux Pelham
Other services in Furneux Pelham
Landlord and trade work in Furneux Pelham
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Landlords, letting agents and housing providers in Furneux Pelham use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
When a repair is not the answer
A repair is not right for every job, for example:
- Cracks in parts of an acrylic bath we cannot get to from below
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
What happens on the day
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to a few hours, tidy-up included.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the day after.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Read more
Furneux Pelham: your questions answered
Can you repair a hole in a bath?
Often, if there’s access underneath. The hole is backed, filled and refinished to match.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will the price change on the day?
Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Why repair rather than replace?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. A repair keeps it in place. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- A fixed quote before booking
- Technicians who travel to you, UK-wide
See our pricing and resurfacing vs replacement cost guide.
Furneux Pelham and nearby
Furneux Pelham is about 5 miles north-west of Bishop's Stortford, in Hertfordshire. Wherever you are in the SG9 postcode area, a technician comes to you. Furneux Pelham is one of 381 places in Hertfordshire we cover. Our jobs stretch from Furneux Pelham to London (about 31 miles away).
All of SG9 is covered. That includes homes on The Street and The Causeway and the roads around them. Neighbouring places we cover include Albury (1 mile south), Gravesend (2 miles south), Brent Pelham (2 miles north), Clapgate (2 miles south) and Great Hormead (2 miles north-west). Further out, we also cover Stevenage (11 miles west), Bishop's Stortford (5 miles south-east), Welwyn Garden City (15 miles south-west), Hitchin (15 miles west), Hoddesdon (13 miles south) and Hertford (11 miles south-west).
Landmarks near Furneux Pelham
Typical jobs here are in homes near Church of St Mary, The Star Public House and Furneux Pelham Church of England School. Nearby you’ll also find Brent Pelham (2.1 miles north).
Prices and what affects them
Prices start from £95. We don’t charge extra for travel to Furneux Pelham. The price depends on:
- The material
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- How easy the damage is to reach
We charge the same wherever you are, so there is no premium for Furneux Pelham. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from photos
Most quotes are done from pictures alone. To help us price it:
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- A photo taken from further back
- Your postcode, so we can check dates
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Looking after it afterwards
So the finish stays in good condition:
- Keep metal cans and razors off the surface
- Keep abrasive pads and gritty cleaners away from the bath
- Get a dripping tap fixed promptly
- Ensure an acrylic bath is firm underfoot
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
