Swansea · Wales

Bath Repair in Garn-Las

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Garn-Las and across Swansea. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Chips along the edge of the bath
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Garn-Las

Bath repair in Garn-Las, done in place

Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. We are often asked to fix deep scratches in acrylic and chips caused by builders, on acrylic, whirlpool & spa baths and cast iron enamel.

We stand behind the work with a one-year guarantee.

Before and after: a damaged acrylic bath corner repaired in place
Where
Garn-Las (SA2)
County
Swansea
Guarantee
12 months on all our work
Quotes
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Keeping it looking good

Aftercare is simple:

  • Protect the bath with a towel when doing jobs nearby
  • Get any new chip repaired before it rusts
  • Rinse the bath after use, especially in hard water areas
  • A dripping tap stains enamel, so fix it early

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.

Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.

Signs you need bath repair in Garn-Las

Rust normally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

It’s worth getting a quote if you see:

  • Scuffs and scratches in the surface
  • Chips caused by builders
  • Hairline or through cracks in acrylic
  • An old repair that has yellowed or come loose

What to look for in a quote

  • How the colour is matched
  • If travel is included in the price
  • Whether cleaning and preparation are in the price
  • What happens if the damage is worse than the photos show

How to compare quotes

Your questions about bath repair in Garn-Las

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Something went through my bath. Can it be fixed?

Generally. Send us a photo of the hole and one from under the bath if you can.

What happens once I’ve sent pictures?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.

Can you repair a chip on a coloured bath?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

How quickly can you book me in?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.

Will there be a smell?

Some materials have a smell while they’re applied. It clears as the materials cure.

How the visit works

A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Allow two to three hours for most chips from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the day after.

Getting ready for the visit

  • Mention any earlier repairs or resurfacing
  • Point us to the nearest place to park
  • Clear toiletries, mats and anything else from around the area

Get a quote

You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Send pictures for a quote

Related advice

Repair or replace in Garn-Las?

Replacing a bath rarely stops at the bath: tiles along the rim usually crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why us?

  • Every repair guaranteed for a year
  • A fixed quote before you book
  • Rooms protected and left tidy
  • Colour-matched on site

Take a look at our prices page or resurfacing vs replacement cost guide.

Landlords, agents and businesses in Garn-Las

We carry out planned and one-off repairs for housing associations and facilities teams in Swansea and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

Garn-Las and nearby

Garn-Las is about 2 miles west of Swansea, in Swansea. Jobs in Garn-Las are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We cover 153 places in Swansea, from the larger towns to small villages.

We work across SA2. Whether you live on Gower Road, Vivian Road and Tycoch Road or a nearby road, we can come to you. Garn-Las sits on or near the A4118 and A4216, which makes travel easy. Neighbouring places we cover include Carn-glas (1 mile north), Tycoch (1 mile south-east), Penyrheol (1 mile south), Sketty (1 mile south-east) and Cockett (1 mile east). Larger places within reach include Morriston (4 miles north-east), Gorseinon (4 miles north-west), Landore (3 miles north-east), Llwchwr (3 miles north-west), Mumbles (3 miles south) and Lisbon (3 miles north-east).

What’s near Garn-Las

Around Garn-Las, we work in homes near Sketty Primary School, Olchfa School and Vivian Arms Hotel. Also close by are Glanmôr School (0.9 miles east) and St Paul's Church (0.7 miles south-east). Garn-Las’s nearest station is Swansea station, roughly 2.4 miles east. Nearby you’ll also find Cefn Coed Hospital (under half a mile north-east) and Original Swansea Castle (2.3 miles east). For a walk, there is Carnglas Hill and Pluck Lake.

Map of Garn-Las © OpenStreetMap contributors

What bath repair costs

Prices start from £95. Each job gets its own fixed price. This is what makes a difference:

  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear
  • The colour and finish to match
  • Where the damage is and how we get to it

Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

How to get a fixed quote

When you take your pictures, a few simple things make all the difference:

  • Daylight if possible, and no flash reflection
  • Whether it’s been repaired or coated before
  • A close-up of the damage, in focus
  • A wider photo showing the whole bath

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.

Repairs by material

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • Flexing caused by a failed cradle or loose feet
  • A bath worn all over, where resurfacing makes more sense
  • Rust that has eaten right through a steel bath

If in doubt, send pictures and we will say what we think.

Materials we work on in Garn-Las

  • Cast iron enamel
  • Acrylic
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Pressed steel enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.