North Yorkshire · England
Bath chip & crack repair in Gateforth, North Yorkshire
Bath repair for Gateforth, without a refit. Send us photos for a fixed quote, then book a visit.
- Repairs from £95
- Chips on the rim or sides
- Damage beneath the taps
About Gateforth
Gateforth is about 4 miles south-west of Selby, in North Yorkshire. From the centre of Gateforth to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Gateforth is one of 626 places in North Yorkshire where we work. You can also see our page for Leeds, about 17 miles away.
Every address in YO8 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Landing Road and Hillam Road and the roads around them. Nearby, we also work in Gateforth Park (1 mile north-east), West Haddlesey (1 mile south), Hambleton (1 mile north-west), Chapel Haddlesey (2 miles south-east) and Thorpe Willoughby (2 miles north-east). We also work in nearby towns such as Selby (4 miles north-east), Tadcaster (10 miles north-west), Barlby (6 miles north-east), Brayton (3 miles north-east), Cawood (6 miles north) and Church Fenton (6 miles north-west).
Landmarks near Gateforth
The closest station to Gateforth is Whitley Bridge station, roughly 3.6 miles south of the centre.
Bath repair in Gateforth without replacing anything
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Whether it’s a cracked acrylic bath and rusty patches near the plughole, we can help, on acrylic, pressed steel enamel and whirlpool & spa baths alike.
Every repair comes with a one-year guarantee.
- Where
- Gateforth (YO8)
- Region
- North Yorkshire
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
Send us photos and we will tell you honestly.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
Landlords, agents and businesses in Gateforth
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
How we price bath repair
Prices start from £95. We charge the same across the UK, including Gateforth. What changes the price is:
- How easy the damage is to reach
- How many items we do on one visit
- What kind of damage it is
- How much damage there is
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Getting a price from photos
Before you send pictures, a few simple things make all the difference:
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- Something in shot to show the size
- Any details about the material
For a price in Gateforth, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
More services for Gateforth
Common questions in Gateforth
Can you repair something that is been repaired before?
Yes, we often do. Removing the old work can add time, and that is in the quote.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Will the price change on the day?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
I tried a repair kit. Can you fix it?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Open a window if you can
- Point us to the nearest place to park
- Let us know about parking or access
Get a quote
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Advice
Why repair rather than replace?
Swapping a damaged bath for a new one usually means a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- One price list for the whole UK
- Colour mixed on the day to match
- CHAS and Constructionline accredited
- Everything repaired in place
Read our prices page and bath cost comparison.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What we are called out for in Gateforth
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
It’s worth getting a quote if you see:
- A chip where the taps sit
- Chips on the rim or sides
- Deep scratches in acrylic
- Snagging damage from a refit
What your quote should include
- Whether the colour is mixed to match
- What aftercare is recommended
- When it can be used again
- Whether the price is fixed and includes VAT
About our accreditations · Every repair comes with a one-year guarantee.
