Pembrokeshire · Wales
Bath Repair in Gellyswick
We travel to Gellyswick for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips caused by builders
- Deep scratches in acrylic
The process
We agree an arrival time beforehand. Once we’re there, the work takes a morning or an afternoon in most cases. The room is left tidy and ready to use once it has cured.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Read more
Bath repair in Gellyswick, done in place
A typical bath repair is a few hours’ work, and you can usually bathe again the following day. You won’t need a plumber or tiler, because the bath doesn’t move. Whether it’s chips on the rim or sides and rusty patches near the plughole, we can help, on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths alike.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Gellyswick (SA73)
- Area hub
- Pembrokeshire
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
Replacing a fitted bath normally means a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. A repair fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with no extras added later.
Why book with us
- Colour mixed on the day to match
- Most jobs done in one visit
- We leave the room as we found it
- Nothing taken out or refitted
Take a look at our full price list and bath cost comparison.
Looking after it afterwards
To keep it looking its best:
- Rinse the bath after use, especially in hard water areas
- If an acrylic bath flexes, have its feet adjusted
- Store metal items away from the bath
- Avoid scourers, wire wool and gritty cream cleaners
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Landlord and trade work in Gellyswick
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
When to call us in Gellyswick
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
You may need us if you’ve spotted any of these:
- Deep scratches in acrylic
- Damage done while the bathroom was being fitted
- A hole punched through by something heavy
- A chipped rim or side
Questions to ask before booking
- What the guarantee covers, and for how long
- When it can be used again
- How your room will be protected
- Whether there are any call-out or travel charges
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Honest limits
We’ll always be straight with you, so here’s what a repair can’t fix:
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
Our work in Gellyswick
Gellyswick is about 1 mile west of Milford Haven, in Pembrokeshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover all 223 towns and villages in Pembrokeshire, from the larger towns to small villages.
Postcode districts we cover here: SA73. Nearby, we also work in Hubberston (1 mile north-east), Hakin (1 mile east), Haven's Head (1 mile east), Liddeston (1 mile north-east) and Milford Haven (1 mile east). Within a short drive, we also cover Haverfordwest (7 miles north-east), Pembroke (7 miles east), Pembroke Dock (5 miles east), The Marsh (8 miles north-east), The Green (15 miles east) and Green (7 miles east).
Near you in Gellyswick
Locally, our jobs take us to homes close to Milford Haven School, St David's Church and Three Crowns pub and the streets around them. The nearest railway station is Milford Haven station, roughly 1.1 miles east of the centre. Other landmarks nearby include South Pembrokeshire Hospital (4.9 miles east) and North Hill (1.9 miles south-west). Not far away are North Hill and Hubberstown Pill.
Also near Gellyswick
Also in Gellyswick
Common questions in Gellyswick
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
Do you cover the entire of Pembrokeshire?
We work UK-wide. Our prices are the same everywhere.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
How much does bath repair cost in Gellyswick?
Repairs from £95. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
What bath repair costs
Repairs from £95. We price every job individually, from your pictures. The main factors are:
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- How hard the colour is to match
- The size and number of damaged areas
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- A close-up of the damage, in focus
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
