Pembrokeshire · Wales
Bath chip & crack repair in Hubberston, Pembrokeshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Hubberston. Free, fixed quotes from your photos.
- Repairs from £95
- A cracked acrylic bath
- Damage done while the bathroom was being fitted
What we do, step by step
You do not need to empty the room. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. Most jobs take two to three hours for most chips, and you’re welcome to carry on with your day while we work.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
Preparing for the visit
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Advice
How we handle bath repair in Hubberston
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath and the tiles around it. You can normally use the bath the day after. Typical jobs include a chip where the taps sit and rusty patches near the plughole, across acrylic, whirlpool & spa baths and cast iron enamel.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Hubberston (SA73)
- County
- Pembrokeshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Hubberston
Hubberston is about 1 mile west of Milford Haven, in Pembrokeshire. Whether you’re in the middle of Hubberston or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Hubberston is one of 223 places in Pembrokeshire we cover.
Every address in SA73 is within our area. Whether you live on Clay Lane, Picton Road and Church Road or anywhere nearby, we can come to you. We also cover the places around Hubberston: Hakin (1 mile south-east), Haven's Head (1 mile east), Gellyswick (1 mile south-west), Liddeston (1 mile north-east) and Milford Haven (1 mile east). Larger places within reach include Haverfordwest (7 miles north-east), Pembroke (7 miles south-east), Pembroke Dock (5 miles east), The Marsh (7 miles north-east), Dinbych-y-Pysgod (15 miles east) and The Green (15 miles east).
Local landmarks in Hubberston
In Hubberston, that means homes near St Francis V.R.C. School, Three Crowns pub and Milford Haven School, among other places. For rail, the closest station is Milford Haven station, about 0.6 miles east of the centre. Further afield, we also cover the area around South Pembrokeshire Hospital (4.5 miles east) and Castle Pill (1.8 miles east). Not far away are Hubberstown Pill and North Hill.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Questions from Hubberston
What areas do you cover?
Everywhere in the UK, Hubberston included. There is no extra charge for travel.
How long does the repair take to cure?
Most baths can be used the day after. We confirm the time before we leave.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Can you repair a crack in an acrylic bath?
Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Will the price change on the day?
Your quote covers the damage in the photos. If there is more, we will tell you before starting.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Hubberston.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
How we price bath repair
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- What the surface is made of
- How easy the damage is to reach
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your pictures
We price nearly every job from pictures. This is what we need:
- Details of any past repairs
- One sharp close-up of the damage
- The material, if you know it
- A picture taken from further back
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Also near Hubberston
What else we do in Hubberston
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We work for landlords, letting agents and housing providers in Hubberston as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Keep metal cans and razors off the surface
- Put a towel in the bath if you’re working above it
- If an acrylic bath flexes, have its feet adjusted
- Use a soft cloth and washing-up liquid for everyday cleaning
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
What we’re called out for in Hubberston
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
People typically call us after spotting something like this:
- Impact holes in acrylic
- Scratches you can feel with a fingernail
- Chips under the taps
- Cracks in an acrylic bath
Before booking anyone
- Whether cleaning and preparation are in the price
- How the colour is matched
- What the guarantee covers, and for how long
- What aftercare is recommended
What a repair cannot fix
A repair isn’t right for every job, for example:
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
