Caerphilly · Wales

Bath chip & crack repair in Gilfach, Caerphilly

Problem with your bath in Gilfach? We put it right where it is, match it on site and guarantee the work for a year.

  • Repairs from £95
  • Chips on the rim or sides
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Gilfach homes

Bath repair at your home in Gilfach

Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, typically in a single visit. Our repair technicians work on acrylic, roll-top & freestanding and pressed steel enamel, and the jobs we see most are rust spots around the plughole and a failed DIY repair that’s discoloured or lifting.

Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Before and after: a damaged acrylic bath corner repaired in place
Area
Gilfach (CF81, NP12, CF82)
County
Caerphilly
Guarantee
12 months on all our work
Price
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026

Should you replace it?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.

Why Gilfach customers choose us

  • Colours mixed by hand to suit your surface
  • Dust sheets down, tidy finish
  • Same prices wherever you are
  • Honest advice, even when it means no job

See our full price list and resurfacing vs replacement cost guide.

Our work in Gilfach

Gilfach is about 1 mile north-west of Cefn Fforest, in Caerphilly. Our repair technicians come to homes and businesses in Gilfach, so you don’t need to take anything anywhere. Gilfach is one of 94 towns and villages in Caerphilly where we work. We work right across the region, from Gilfach to Birmingham (79 miles away).

We cover every part of the CF81, NP12 and CF82 postcode area and the streets around it. We regularly work on streets such as The Avenue, Gwerthonor Road and Gwerthonor Lane and the roads around them. We also cover the places around Gilfach: Bargoed (1 mile north), Glan-y-nant (1 mile south), Pen-pedair-heol (1 mile south-west), Pengam (1 mile south-east) and Aberbargoed (1 mile north-east). Within a short drive, we also cover Caerphilly (7 miles south), Risca (8 miles south-east), Trecceln (4 miles east), Newbridge (4 miles east), Beddau (7 miles south) and Trecenydd (7 miles south).

What’s near Gilfach

Our clients here include homes close to Lewis School Pengam, Ysgol Gymraeg Gilfach Fargod and Gilfach Fargoed Primary School and the streets around them. Other local landmarks include Capel Hotel (within half a mile north-east) and St Margaret's (under half a mile north-east). Gilfach has its own railway station: Gilfach Fargoed station. A little further out are Llancaiach Fawr Living History Museum (2.5 miles south-west) and Twyn Castell (1.2 miles south-west). Not far away are Parc Coetir Bargoed.

Map of Gilfach © OpenStreetMap contributors

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

How to look after the repair

Simple care helps the repair last. We recommend:

  • Rinse it down after each bath
  • Do not leave razors or cans standing in the bath
  • Get any new chip repaired before it rusts
  • Clean with warm water and a mild detergent

Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.

Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

When a repair isn’t the answer

Some jobs are not right for a repair, for example:

  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • A steel bath rusted through
  • Cracks in acrylic we can’t reach from underneath

If in doubt, send photos and we will say what we think before you book.

Materials we repair

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic

Questions from Gilfach

Is the work guaranteed?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

What do you need from me?

Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.

Is a repair better than a new one?

Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.

How do I get a price for bath repair in Gilfach?

Prices start from £95. Because every job differs, we price from pictures. You will get a fixed figure before booking.

Will you leave a mess?

No. The work area is masked and covered, and we take our waste away with us.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.

Can landlords book you?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

How the visit works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, generally the day after.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Tell us about any previous repairs or coatings
  • Let us know about parking or access

Get a quote

A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.

Get a fixed price

Related advice

What bath repair costs

Prices start from £95. Each job gets its own fixed price. These are the things that affect it:

  • How easy the damage is to reach
  • How many areas need work
  • How many items we do on one visit
  • Any earlier repairs that need removing first

We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed quote

Phone photos are fine, there is no need for anything special. Just make sure we can see:

  • Details of any past repairs
  • Daylight if possible, and no flash reflection
  • A coin or ruler next to the damage for scale
  • What it’s made of, if you know

Most customers in Gilfach get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Landlords, agents and businesses in Gilfach

If you manage property in Gilfach, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.

We carry out planned and one-off repairs for housing associations and facilities teams in Caerphilly and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Do you need bath repair in Gilfach?

Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

Signs it’s time to call us include:

  • Chips along the edge of the bath
  • An old repair that has yellowed or come loose
  • Rust spots around the plughole
  • A chip where the taps sit

Questions to ask before you book

  • Whether cleaning and preparation are in the price
  • What the guarantee covers, and for how long
  • Aftercare advice
  • What protection goes down before work starts

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.