Warwickshire · England
Bath Repair in Gilson
Bath repair across Gilson and nearby, generally in one visit and guaranteed for a year.
- Repairs from £95
- Chips under the taps
- A kit repair that didn’t last
How we handle bath repair in Gilson
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There’s no plumbing to disconnect, the tiles are not touched, and the repaired area is colour-matched so it blends in. We regularly repair acrylic, whirlpool & spa baths and cast iron enamel, and people most frequently call us about a failed DIY repair that’s discoloured or lifting and rusty patches near the plughole.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Gilson (B46)
- County
- Warwickshire
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Places near Gilson
What else we do in Gilson
For landlords and businesses
We work for landlords, letting agents and housing providers in Gilson as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a morning or an afternoon. Before we go, we’ll explain how long to leave it and how to care for it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Make sure the area is dry
- Ensure the room can be ventilated
- Have somewhere for us to park nearby if possible
Get a quote
Send us pictures of the damage and one of the entire item, and tell us you’re in Gilson, and we will reply with a fixed price.
Read more
Common questions in Gilson
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Is repairing better than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Where we work around Gilson
Gilson is about 6 miles south-east of Royal Sutton Coldfield, in Warwickshire. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Gilson is one of 324 places in Warwickshire where we work. We work right across the region, from Gilson to Birmingham (about 8 miles away).
Every address in B46 is within our area, from the main roads to the quietest streets. Whether you live on Meadowbank Drive and Gilson Road or a nearby road, a technician can come to you. Close by, we cover Coleshill (1 mile south-east), Water Orton (1 mile north-west), Smith's Wood (1 mile south-west), Curdworth (2 miles north) and Wiggins Hill (2 miles north-west). Within a short drive, we also cover Nuneaton (11 miles east), Bedworth (10 miles east), Kenilworth (13 miles south-east), Atherstone (9 miles north-east), Castle Vale (3 miles west) and Chilvers Coton (11 miles east).
Landmarks near Gilson
Locally, our jobs take us to homes close to St Peter and St Paul's Church, Meriden Park and High Meadow Infant School. Also close by are Smith's Wood Sports College (1.3 miles south-west) and The Green Man Public House (0.9 miles south-east). For rail, the closest station is Coleshill Parkway station, about 0.7 miles north-east of the centre. Other landmarks nearby include Castle Vale Shopping Centre (3.2 miles west) and Brooklands Hospital (2.9 miles south). Open spaces near Gilson include Shard End Lake and Ladywalk Reserve.
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Avoid scourers, wire wool and gritty cream cleaners
- Get a dripping tap fixed promptly
- Don’t leave razors or cans standing in the bath
- Make sure an acrylic bath is firm underfoot
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
Do you need bath repair in Gilson?
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Keep an eye out for these signs:
- Damage done while the bathroom was being fitted
- Holes from dropped items
- A chipped rim or side
- A cracked acrylic bath
Questions to ask before you book
- Whether cleaning and preparation are in the price
- Whether the price covers travel
- How the colour is matched
- How long the guarantee is and what it covers
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
What bath repair costs
Repairs from £95. You’ll know the full cost before booking. We take into account:
- Where the damage is and how we get to it
- The material
- How hard the colour is to match
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
When you take your pictures, these tips help us give you a firm price:
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- Any details about the material
- Your postcode, so we can check dates
If you’re in Gilson and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What we can’t put right
Before booking, it’s worth knowing the limits too:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
