Essex · England
Bath Repair for Gilston homes
Bath repair across Gilston and nearby, normally in one visit.
- Repairs from £95
- Chips caused by builders
- A kit repair that didn’t last
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why us?
- Everything repaired in place
- One visit for most repairs
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
Read our prices page and bath cost comparison.
About our bath repair in Gilston
Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. We work on roll-top & freestanding, cast iron enamel and pressed steel enamel, and common reasons people contact us are damage beneath the taps and holes from dropped items.
You get a one-year guarantee, the same in Gilston as everywhere else we work.
- Area
- Gilston (CM20)
- Area hub
- Essex
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Gilston
Also in Gilston
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Keeping it looking good
Once the work has cured, treat it gently:
- Keep abrasive pads and gritty cleaners away from the bath
- Keep metal cans and razors off the surface
- Get any new chip repaired before it rusts
- Check that an acrylic bath doesn’t move when you stand in it
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.
What we cannot put right
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
How the visit works
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours, and we’ll tell you if anything changes.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Have a window or extractor fan available
- Ensure the area is dry
- Keep a parking space free if you can
Getting a price
For a price in Gilston, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
Landlords, agents and businesses in Gilston
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Signs you need bath repair in Gilston
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
These are the problems we’re asked about most:
- Rust by the waste and overflow
- Cracks in an acrylic bath
- Holes from dropped items
- A failed DIY repair that is discoloured or lifting
What to look for in a quote
- What happens if they find more damage
- Who will actually do the work
- The length of the guarantee and what it covers
- Aftercare advice
FAQs for Gilston
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
How much does bath repair cost in Gilston?
Repairs from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Do you cover Gilston?
Yes. We work across the UK and travel to Gilston and the rest of Essex. Send photos and we’ll quote, or call 0345 017 0787.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Covering Gilston
Gilston is about 2 miles north-west of Harlow, in Essex. Whether you are in the middle of Gilston or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Gilston is one of 644 places in Essex where we work. Our nearest city page is London, about 22 miles away.
All of CM20 is covered. Whether you live on Pye Corner and Eastwick Road or a nearby road, we can come to you. Nearby, we also work in Eastwick (1 mile south-west), Little Parndon (1 mile south-west), Great Parndon (2 miles south), Staple Tye (3 miles south) and Roydon (3 miles south-west). Further out, we also cover Brentwood (14 miles south-east), Loughton (10 miles south), Waltham Abbey (8 miles south-west), Great Dunmow (13 miles north-east), Epping (6 miles south) and Stansted Mountfitchet (9 miles north-east).
Local landmarks in Gilston
In Gilston, that means homes near Harlow Marsh, Burnt Mill Academy and The Plume Of Feathers pub. Also close by are St Alban's Catholic Academy (1 mile south-east) and Parish Church of St Mary (1 mile north-west). The nearest railway station is Harlow Town station, roughly 0.6 miles south of the centre. Other landmarks nearby include Mark Hall Cycle Museum (1.3 miles south-east) and Harlow Mill (1.2 miles east). Open spaces near Gilston include Hunsdon Mead.
About our accreditations · Every repair comes with a one-year guarantee.
