Conwy · Wales
Bath chip & crack repair in Glascoed, Conwy
We travel to Glascoed for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Impact holes in acrylic
- Chips along the edge of the bath
Common problems we fix in Glascoed
A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.
Send us a picture if you notice any of these:
- Damage done while the bathroom was being fitted
- A cracked acrylic bath
- A chipped rim or side
- Rusty patches near the plughole
Before you book anyone
- What the guarantee covers, and for how long
- How the colour is matched
- Whether there are any call-out or travel charges
- How soon you can use it again
Bath repair at your home in Glascoed
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. If you’re dealing with chips caused by builders and damage beneath the taps, we can help, whatever the material.
Big or small, it’s backed by a one-year guarantee in Glascoed and across Conwy.
- Where
- Glascoed (LL22)
- Region
- Conwy
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Glascoed
Other services in Glascoed
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Covering Glascoed
Glascoed is about 5 miles south of Rhyl, in Conwy. We visit customers in Glascoed, so there is no workshop to go to. Glascoed is one of 75 places in Conwy we cover. Our nearest city page is Liverpool, about 26 miles away.
Every address in LL22 is covered, from the main roads to the quietest streets. Nearby, we also work in Bodelwyddan (1 mile north), Llansan Sior (2 miles north-west), St Asaph (3 miles east), Rhuddlan (3 miles north-east) and Nant-y-Patrick (3 miles south-east). We also work in nearby towns such as Bae Colwyn (10 miles west), Llandudno (14 miles west), Old Colwyn (9 miles west), Colwyn Bay (8 miles west), Abergele (4 miles north-west) and Colwyn Bay (10 miles west).
Around Glascoed
Our clients here include homes close to Ysgol Cefn Meiriadog and Marble Church and the streets around them. The closest station to Glascoed is Abergele & Pensarn station, about 4.3 miles north-west of the centre. Other landmarks nearby include St Asaph Cathedral Museum (2.5 miles east) and Glan Clwyd Hospital (1.3 miles north). The countryside around Glascoed includes Marine Lake and Rhuddlan Nature Reserve.
Keeping it looking good
Once the work has cured, treat it gently:
- Get a dripping tap fixed promptly
- Check that an acrylic bath doesn’t move when you stand in it
- Don’t leave a fresh chip for long
- Keep metal cans and razors off the surface
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
How it works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. Allow two to three hours for most chips.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Clear toiletries, mats and anything else from around the area
- Make sure the area is dry
Ask for a price
Most clients in Glascoed get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Honest limits
Some jobs are not right for a repair, for example:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A steel bath rusted through
- Leaking fittings, which need a plumber
Send us pictures and we’ll tell you honestly.
What we work on
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
What affects the price in Glascoed
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- How easy the damage is to reach
- The type of damage
A repair is priced on what needs doing, not where you live. You’ll see the full price before you book.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- A wider photo showing the whole bath
- The material, if you know it
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Why repair rather than replace?
Many people think a damaged bath means a new one. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why book with us
- Repair technicians who travel to you, UK-wide
- A fixed quote before booking
- Most jobs done in one visit
- Everything repaired in place
See our full price list or resurfacing vs replacement cost guide.
Glascoed: your questions answered
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
When can I have a bath again?
Most baths can be used the following day. We confirm the time before we leave.
Can you redo an old repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
How do I get a price for bath repair in Glascoed?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Which areas do you work in?
All of Conwy, and the rest of the UK. Travel is included in the price.
About our accreditations · Every repair comes with a one-year guarantee.
