Hampshire · England
Bath chip & crack repair in Golden Pot, Hampshire
Bath repair across Golden Pot and nearby, typically in one visit and guaranteed for a year.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Deep scratches in acrylic
The process
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. It normally takes two to three hours for most chips, and we will keep you posted as we go.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the following day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Make sure the area is dry
- Keep children and pets away from the room on the day
How to get a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Related advice
About our bath repair in Golden Pot
A typical bath repair is a few hours’ work, and you can usually bathe again the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. Whether it’s holes from dropped items and chips caused by builders, we can usually put it right, whatever the material.
Every job is backed for twelve months in Golden Pot and everywhere else. We return to put right any problem with the work.
- Area
- Golden Pot (GU34)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
Send us photos and we’ll tell you honestly.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
Towns and villages near Golden Pot
More services for Golden Pot
Our work in Golden Pot
Golden Pot is about 2 miles north of Alton, in Hampshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 683 towns and villages in Hampshire, from the larger towns to small villages. We work right across the region, from Golden Pot to London (about 44 miles away).
Every address in GU34 is covered, from the main roads to the quietest streets. We also travel to Holybourne (2 miles south-east), Alton (2 miles south), Neatham (2 miles south-east), Upper Froyle (3 miles east) and Froyle (3 miles east). Larger places within reach include Basingstoke (8 miles north-west), Farnborough (12 miles north-east), Fleet (9 miles north-east), Aldershot (11 miles north-east), Petersfield (13 miles south) and Yateley (13 miles north-east).
What’s near Golden Pot
Locally, our jobs take us to homes close to The Golden Pot pub and HSDC Alton and the streets around them. Golden Pot’s nearest station is Alton station, roughly 2.3 miles south of the centre. A little further out are Gliding Heritage Centre (1.6 miles west) and Alton Community Hospital (3 miles south). For a walk, there is Holybourne Hill.
Golden Pot questions
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Something went through my bath. Can it be fixed?
Generally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help.
Is a repair better than a new one?
Typically, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Keeping it looking good
Looking after the surface is easy:
- Protect the bath with a towel when doing jobs nearby
- A dripping tap stains enamel, so fix it early
- Keep metal cans and razors off the surface
- Stick to mild cleaners and a soft cloth
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why us?
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
- One price list for the entire UK
- One visit for most repairs
Read our pricing and resurfacing vs replacement cost guide.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What bath repair costs
Repairs from £95. A fixed quote means you know the cost before booking. We look at:
- How much damage there is
- How hard the colour is to match
- The type of damage
- How easy the damage is to reach
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
- Whether it’s been repaired or coated before
- Any details about the material
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
