Hampshire · England
Bath Repair for Neatham homes
Bath repair across Neatham and nearby, done in a single visit in most cases.
- Repairs from £95
- Impact holes in acrylic
- Scuffs and scratches in the surface
Looking after it afterwards
Once the work has cured, treat it gently:
- Clean with warm water and a mild detergent
- Have new chips seen to early
- Rinse the bath after use, especially in hard water areas
- A dripping tap stains enamel, so fix it early
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
About our bath repair in Neatham
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. We work on acrylic, whirlpool & spa baths and cast iron enamel, and common reasons people get in touch are chips along the edge of the bath and a failed DIY repair that’s discoloured or lifting.
Every repair comes with our one-year guarantee.
- Area
- Neatham (GU34)
- Area hub
- Hampshire
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Neatham
Neatham is about 2 miles north-east of Alton, in Hampshire. Whether you’re in the middle of Neatham or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We cover all 683 towns and villages in Hampshire. Our nearest city page is London, about 43 miles away.
Here we cover the GU34 postcode area. We also cover the places around Neatham: Holybourne (1 mile north-west), Wyck (1 mile south-east), Upper Froyle (1 mile north-east), Alton (2 miles south-west) and East Worldham (2 miles south). Further out, we also cover Basingstoke (10 miles north-west), Farnborough (12 miles north-east), Fleet (9 miles north-east), Aldershot (10 miles north-east), Petersfield (11 miles south) and Yateley (13 miles north).
Near you in Neatham
Our clients here include homes close to Holy Rood Church, Eggar's School and Treloar School, among other places. You’ll also find White Hart pub (under half a mile west) and Andrews' Endowed Church of England Primary School (0.6 miles west). For rail, the closest station is Alton station, about 1.3 miles south-west. Well-known places in the area include Allen Gallery (1.6 miles south-west) and Alton Community Hospital (2.6 miles south-west). Not far away are Holybourne Hill.
FAQs for Neatham
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
How much does bath repair cost in Neatham?
Prices start from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.
Is a holed acrylic bath repairable?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Do you work in Neatham?
Yes. We work across the UK and come to Neatham. Send photos and we will quote, or call 0345 017 0787.
When to call us in Neatham
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water collects there, so chips nearby rust quickly.
You may need us if you’ve spotted any of these:
- Chips caused by builders
- A chip where the taps sit
- Scratches you can feel with a fingernail
- Chips on the rim or sides
Questions to ask before you book
- Whether cleaning and preparation are in the price
- How your room will be protected
- Whether the price is fixed and includes VAT
- How long it needs to cure
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- Colours mixed by hand to suit your surface
- No need to remove anything
- Rooms protected and left tidy
- CHAS, Constructionline and SafeContractor accredited
Read our pricing and guide to resurfacing and replacement costs.
Prices and what affects them
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- The material and finish
- The colour and finish to match
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- The material, if you know it
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Also near Neatham
More services for Neatham
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
How it works
We agree an arrival time beforehand, so you are not left guessing. On site, it takes two to three hours for most chips for most jobs. We leave the room clean and you will know when it can be used.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
When we would advise against a repair
Before booking, it’s worth knowing the limits too:
- Wear across the whole surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Landlords, agents and businesses in Neatham
Landlords, letting agents and housing providers in Neatham use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
