Edinburgh · Scotland
Bath Repair in Goldenacre
Local bath repair for Goldenacre: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Rust spots around the plughole
- A chipped rim or side
Signs you need bath repair in Goldenacre
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal lets water in, and rust follows.
The things customers generally mention when they call are:
- A chip where the taps sit
- Chips caused by builders
- Scratches you can feel with a fingernail
- A cracked acrylic bath
Questions to ask before you book
- Whether they match the colour on site
- How soon you can use it again
- How the room is protected while they work
- A fixed price, and whether VAT is included
Bath repair in Goldenacre, done in place
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Common call-outs are for rust by the waste and overflow and scuffs and scratches in the surface, on roll-top & freestanding, cast iron enamel and whirlpool & spa baths.
You get a one-year guarantee, the same in Goldenacre as everywhere else we work.
- Area
- Goldenacre (EH5, EH3, EH6)
- Region
- Edinburgh
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Goldenacre
More services for Goldenacre
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A bath worn all over, where resurfacing makes more sense
- Cracks in acrylic we cannot reach from underneath
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Aftercare tips
So the finish stays in good condition:
- Make sure an acrylic bath is firm underfoot
- Don’t leave a fresh chip for long
- Do not scrub with anything abrasive
- Get a dripping tap fixed promptly
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
How the visit works
Your technician turns up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
- Ensure the area is dry
How to get a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
Repair or replace: which is better?
Replacing a fitted bath normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Prices start from £95. Our prices are the same across the UK, with no extra for Goldenacre. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Goldenacre clients choose us
- Fixed prices from your photos
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
- Nothing taken out or refitted
Take a look at our full price list or resurfacing vs replacement cost guide.
Goldenacre and the surrounding area
Goldenacre is about 1 mile north-west of Canonmills, in Edinburgh. From the centre of Goldenacre to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Goldenacre is one of 175 places in Edinburgh where we work.
Here we cover the EH5, EH3 and EH6 postcode area. You’ll find streets such as Clark Road, Wardie Road and Kinnear Road, all of which we cover. Nearby, we also work in Inverleith (1 mile south-west), Warriston (1 mile south-east), Boswall (1 mile north-west), Trinity (1 mile north-east) and Stockbridge (1 mile south). Within a short drive, we also cover Newington (3 miles south-east), Queensferry (7 miles west), Burgh Muir (3 miles south), South Portobello (4 miles south-east), The Grange (3 miles south) and Southhouse (5 miles south-east).
Around Goldenacre
Our customers here include homes close to Old Chain Pier pub, Broughton High School and St Serf's Church, among other places. Also close by are Trinity Academy (0.7 miles north-east), Victoria Park (0.7 miles north-east), London Street Primary School (1.1 miles south-east) and Stockbridge public library (0.8 miles south). Goldenacre’s nearest station is Edinburgh Waverley station, roughly 1.5 miles south-east. A little further out are Newhaven Heritage Museum (0.8 miles north-east) and Western General Hospital (1.2 miles south-west). The countryside around Goldenacre includes The New Leaf Co-op and Dunsapie Loch.
Goldenacre questions
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
How long does the repair take to cure?
Usually the day after. We’ll tell you the exact curing time when we finish.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can you repair a crack in an acrylic bath?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
