Worcestershire · England
Bath Repair in Good's Green
We travel to Good's Green for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- Rusty patches near the plughole
Should you replace it?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in one visit. Our bath repair starts from £95. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- CHAS and Constructionline accredited
- Normally one visit, start to finish
- One-year guarantee on every repair
- We leave the room as we found it
Read our full price list and bath cost comparison.
How we handle bath repair in Good's Green
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We work on pressed steel enamel, acrylic and cast iron enamel, and common reasons people contact us are a failed DIY repair that’s discoloured or lifting and a cracked acrylic bath.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.
- Area
- Good's Green (DY12)
- Region
- Worcestershire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Good's Green
Also in Good's Green
Good's Green and nearby
Good's Green is about 4 miles north-west of Kidderminster, in Worcestershire. We visit homes and businesses in Good's Green and nearby villages, so there is no workshop to go to. We cover 376 places in Worcestershire. You can also see our page for Birmingham, about 18 miles away.
We work across DY12 and the streets around it. Neighbouring places we cover include Shatterford (1 mile north-east), Nash End (1 mile north-west), Upper Arley (1 mile west), Romsley (1 mile north) and Stanley (3 miles north-west). Within a short drive, we also cover Kidderminster (4 miles south-east), Bromsgrove (13 miles south-east), Droitwich Spa (13 miles south-east), Stourport-on-Severn (6 miles south), Bewdley (3 miles south) and Chawson (13 miles south-east).
Around Good's Green
Around Good's Green, we work in homes near Red Lion pub. For rail, the closest station is Kidderminster station, roughly 4.4 miles south-east of the centre. A little further out are Kidderminster Hospital and Treatment Centre (3.6 miles south-east) and Crundles Farm (2.5 miles south). Not far away are Kinver Edge.
Landlords, agents and businesses in Good's Green
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Keeping it looking good
So the finish stays in good condition:
- Keep metal cans and razors off the surface
- Use a soft cloth and washing-up liquid for everyday cleaning
- Avoid scourers, wire wool and gritty cream cleaners
- Put a towel in the bath if you’re working above it
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Your questions about bath repair in Good's Green
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote and the next dates we have.
What areas do you cover?
The whole UK, including all of Worcestershire. Just include your postcode and we will confirm dates.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Flexing caused by a failed cradle or loose feet
- Rust that has eaten right through a steel bath
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
Signs you need bath repair in Good's Green
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.
It’s worth getting a quote if you see:
- Rust by the waste and overflow
- Chips caused by builders
- An old repair that has yellowed or come loose
- Chips along the edge of the bath
Comparing quotes
- How long the guarantee is and what it covers
- Who will actually do the work
- What protection goes down before work starts
- Whether the price covers travel
How it works
You do not need to empty the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take a morning or an afternoon, and you’re welcome to carry on with your day while we work.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
Preparing for the visit
- Let us know about parking or access
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Getting a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
