Cornwall · England
Bath chip & crack repair in Gracca, Cornwall
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Gracca and across Cornwall. Free, fixed quotes from your pictures.
- Repairs from £95
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
Honest limits
A repair is not always the answer, and we would rather say so up front. Repairs will not solve:
- Cracks in acrylic we cannot reach from underneath
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
Bath repair at your home in Gracca
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Our repair technicians work on roll-top & freestanding, acrylic and whirlpool & spa baths, and the jobs we see most are damage done while the bathroom was being fitted and deep scratches in acrylic.
Big or small, you get the same one-year guarantee.
- Location
- Gracca (PL26)
- Region
- Cornwall
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why choose Surface Doctor in Gracca
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
- One visit for most repairs
- Dust sheets down, tidy finish
Read our prices page and guide to resurfacing and replacement costs.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
Where we work around Gracca
Gracca is about 4 miles north of Sandy Bottom, in Cornwall. Customers in Gracca get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Gracca is one of 644 towns and villages in Cornwall we cover.
Every address in PL26 is within our area. You’ll find streets such as Roche Road and Charles Street, and we cover them all. Nearby, we also work in Trezaise (1 mile west), Whitemoor (2 miles west), Nanpean (4 miles south-west), Goverseth (4 miles south-west) and St Dennis (4 miles west). Larger places within reach include Truro (15 miles south-west), Newquay (12 miles west), St Austell (4 miles south), Bodmin (6 miles north-east), Sandy Bottom (4 miles south) and Bethel (4 miles south-east).
Local landmarks in Gracca
Our customers here include homes close to Bugle School, among other places. The nearest railway station is Bugle station, roughly 0.5 miles north-east of the centre. Further afield, we also cover the area around St Austell Community Hospital (5 miles south) and Luxulyan Museum And Heritage Centre (2.4 miles east). The countryside around Gracca includes Tresayes Quarry and Hensbarrow Beacon.
Questions from Gracca
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you repair a hole in a bath?
Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
How much does bath repair cost in Gracca?
Repairs from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item with your PL26 postcode.
What areas do you cover?
All of Cornwall, and the rest of the UK. There is no extra charge for travel.
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours. If anything looks different from your pictures, we will talk to you before going ahead.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Open a window if you can
- Point us to the nearest place to park
Ask for a price
If you’re in Gracca and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
When to call us in Gracca
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal will start to rust.
Common reasons people in Gracca contact us include:
- Cracks in an acrylic bath
- Damage done while the bathroom was being fitted
- A failed DIY repair that is discoloured or lifting
- Chips on the rim or sides
Questions to ask before booking
- A fixed price, and whether VAT is included
- What the guarantee covers, and for how long
- Whether a trained technician does the job
- Whether the colour is mixed to match
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Avoid scourers, wire wool and gritty cream cleaners
- Use a soft cloth and washing-up liquid for everyday cleaning
- A dripping tap stains enamel, so fix it early
- Keep metal cans and razors off the surface
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
More services for Gracca
About our accreditations · Every repair comes with a one-year guarantee.
