Essex · England
Bath chip & crack repair in Great Oakley, Essex
Bath repair in and around Great Oakley: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- A chipped rim or side
Landlord and trade work in Great Oakley
We work for landlords, letting agents and housing providers in Great Oakley as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
How we handle bath repair in Great Oakley
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Whether it’s chips along the edge of the bath and a failed DIY repair that’s discoloured or lifting, we can normally put it right, on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel alike.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Great Oakley (CO12)
- Area hub
- Essex
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What bath repair costs
Repairs from £95. Prices are worked out job by job, from your pictures. What matters most is:
- The material and finish
- How many items we do on one visit
- The size and number of damaged areas
- The type of damage
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Quotes from your photos
It only takes a minute to photograph the damage. Try to send:
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- The material, if you know it
- Something in shot to show the size
Email us a picture of the damage and a wider shot of the entire item, with your CO12 postcode, and we will come back with a fixed quote.
Common questions in Great Oakley
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Essex.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What we’re called out for in Great Oakley
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Look out for any of the following:
- Snagging damage from a refit
- Holes from dropped items
- Damage beneath the taps
- Deep scratches in acrylic
Before booking anyone
- Whether a trained technician does the job
- What protection goes down before work starts
- How the colour is matched
- What aftercare is recommended
More services for Great Oakley
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take two to three hours for most chips. We clean up when we are done and let you know when you can use it again.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, usually by the next day, the bath is ready to use.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Clear the area around the damage
- Keep a parking space free if you can
How to get a price
If you’re in Great Oakley and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Repairing versus replacing in Great Oakley
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
Why us?
- One price list for the entire UK
- Dust sheets down, tidy finish
- We’ll tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
See our pricing or guide to resurfacing and replacement costs.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Rinse the bath after use, especially in hard water areas
- Check that an acrylic bath does not move when you stand in it
- Stick to mild cleaners and a soft cloth
- Protect the bath with a towel when doing jobs nearby
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
When we’d advise against a repair
A repair isn’t right for every job, including:
- A bath that moves underfoot, until its support is fixed
- Water coming from the waste or taps rather than the bath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us photos and we’ll tell you honestly.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Great Oakley and nearby
Great Oakley is about 4 miles south-west of Harwich, in Essex. Whether you’re in the middle of Great Oakley or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 644 towns and villages in Essex, from the larger towns to small villages. We work right across the region, from Great Oakley to London (62 miles away).
Every address in CO12 is covered, from the main roads to the quietest streets. Jobs here include addresses on High Street, Orchard Close and Hamford Drive. If you are just outside Great Oakley, we cover Wix Green (1 mile north-west), Wix (2 miles west), Wrabness (3 miles north), Bradfield (4 miles north-west) and Bradfield Heath (4 miles north-west). Larger places within reach include Colchester (12 miles west), Clacton-on-Sea (7 miles south), Harwich (4 miles north-east), Camulodunum (13 miles west), Greenstead (11 miles west) and Wivenhoe (10 miles west).
Near you in Great Oakley
Locally, our jobs take us to homes close to The Maybush pub and Parish Church of All Saints, among other places. Great Oakley’s nearest station is Wrabness station, about 2.6 miles north of the centre. Not far away are Stour Estuary RSPB reserve.
About our accreditations · Every repair comes with a one-year guarantee.
