Surrey · England
Bath chip & crack repair in Green Cross, Surrey
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Green Cross. Send photos for a free, fixed quote.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Holes from dropped items
How we handle bath repair in Green Cross
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you’re dealing with snagging damage from a refit and a kit repair that didn’t last, we can typically put it right, whatever the material.
Every repair comes with a one-year guarantee.
- Area
- Green Cross (GU10)
- Region
- Surrey
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Cracks in parts of an acrylic bath we cannot get to from below
- Metal that has corroded all the way through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us photos and we will tell you honestly.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Green Cross and the surrounding area
Green Cross is about 5 miles south of Farnham, in Surrey. Jobs in Green Cross are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Green Cross is one of 395 towns and villages in Surrey where we work. Our jobs stretch from Green Cross to London (about 38 miles away).
We cover every part of GU10. Neighbouring places we cover include Churt (1 mile west), Whitmoor Vale (1 mile south-west), Beacon Hill (1 mile south-east), Barford (1 mile south-west) and Crosswater (1 mile north-west). We also work in nearby towns such as Guildford (11 miles north-east), Woking (15 miles north-east), Camberley (14 miles north), Farnham (5 miles north), Frimley (12 miles north) and Haslemere (4 miles south-east).
Landmarks near Green Cross
Typical jobs here are in homes near St John's CofE Aided Infant School, The Flashes and St John the Evangelist, among other places. Green Cross’s nearest station is Haslemere station, roughly 3.7 miles south-east. Well-known places in the area include Haslemere and District Hospital (3.8 miles south-east). The countryside around Green Cross includes Gibbet Hill and Farnham Heath.
Should you replace it?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.
Why Green Cross clients choose us
- Colour mixed on the day to match
- Straight answers about what a repair can do
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list and bath cost comparison.
What we are called out for in Green Cross
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
These are the problems we’re asked about most:
- A chipped rim or side
- Rust spots around the plughole
- Deep scratches in acrylic
- Chips caused by builders
Questions to ask before you book
- How soon you can use it again
- What the guarantee covers, and for how long
- A fixed price, and whether VAT is included
- What happens if the damage is worse than the photos show
Aftercare tips
How the surface is treated afterwards matters:
- Fix dripping taps early to stop staining and limescale
- Don’t leave a fresh chip for long
- Protect the bath with a towel when doing jobs nearby
- Don’t scrub with anything abrasive
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Nearby places to Green Cross
Other services in Green Cross
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
The process
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the following day.
Getting ready for the visit
- Have a window or extractor fan available
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
How to get a price
For a price in Green Cross, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
FAQs for Green Cross
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
I tried a repair kit. Can you fix it?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
What happens next?
We come back with a fixed quote, usually with dates to choose from. There’s no obligation to book.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Are there extra charges for Green Cross?
Travel is included in the price, with the same prices everywhere we work.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
About our accreditations · Every repair comes with a one-year guarantee.
