Surrey · England
Bath chip & crack repair in Barford, Surrey
We travel to Barford for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Scuffs and scratches in the surface
- A failed DIY repair that’s discoloured or lifting
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Bath repair at your home in Barford
A typical bath repair is a few hours’ work, and the bath is back in use the next day. There’s no need to book a plumber or tiler, because the bath doesn’t move. Our repair technicians work on roll-top & freestanding, whirlpool & spa baths and acrylic, and people most frequently call us about rust by the waste and overflow and chips caused by builders.
Every job is backed for twelve months in Barford and everywhere else. We return to put right any problem with the work.
- Where
- Barford (GU10, GU26)
- County
- Surrey
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. It normally takes a few hours, depending on the damage, and you are welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Let the surface dry out before the visit
- Let us know if it has been repaired before
- Clear the area around the damage
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Related advice
Barford questions
Something went through my bath. Can it be fixed?
Often, if there is access underneath. We back the hole, fill it and refinish the surface.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we will ask for another angle.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Cover the bath during DIY or decorating
- Fix dripping taps early to stop staining and limescale
- Get any new chip repaired before it rusts
- Use a soft cloth and washing-up liquid for everyday cleaning
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Do you need bath repair in Barford?
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
It’s worth getting a quote if you see:
- Rusty patches near the plughole
- Damage done while the bathroom was being fitted
- A cracked acrylic bath
- Damage beneath the taps
Before you book anyone
- How long the guarantee is and what it covers
- Who turns up on the day
- Whether there are any call-out or travel charges
- Whether cleaning and preparation are in the price
Repairing versus replacing in Barford
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why us?
- We’ll tell you if it’s not worth repairing
- One visit for most repairs
- Nothing taken out or refitted
- Dust sheets down, tidy finish
Read our full price list or resurfacing vs replacement cost guide.
Barford and nearby
Barford is about 4 miles east of Bordon, in Surrey. Anywhere in GU10, a technician comes to you. We cover all 395 towns and villages across Surrey, from the larger towns to small villages. Our nearest city page is London, about 39 miles away.
Postcode districts we cover here: GU10 and GU26. Whether you live on Churt Road, Kitts Lane and Hammer Lane or a nearby road, we can come to you. Neighbouring places we cover include Whitmoor Vale (1 mile south-east), Churt (1 mile north), Green Cross (1 mile north-east), Beacon Hill (1 mile east) and Crosswater (1 mile north). Larger places within reach include Guildford (12 miles north-east), Camberley (14 miles north), Farnham (6 miles north), Frimley (13 miles north), Haslemere (4 miles south-east) and Cranleigh (13 miles east).
What’s near Barford
We visit homes around Crossways Inn, St John's CofE Aided Infant School and The Flashes. For rail, the closest station is Haslemere station, roughly 3.9 miles south-east. Well-known places in the area include Chase Community Hospital (3.8 miles south-west). Open spaces near Barford include Gibbet Hill and Upper Lake.
Also near Barford
Other services in Barford
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Prices and what affects them
Repairs from £95. You will know the full cost before booking. We take into account:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- Whether we combine several jobs
- How hard the colour is to match
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Getting a price from photos
Most quotes are done from pictures alone. To make it quick:
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- The material, if you know it
For a price in Barford, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
About our accreditations · Every repair comes with a one-year guarantee.
