Sheffield · England
Bath Repair for Grenoside homes
We travel to Grenoside for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A cracked acrylic bath
- Damage beneath the taps
Where we work around Grenoside
Grenoside is about 5 miles north of Sheffield, in Sheffield. Wherever you are in the S35 postcode area, we carry out the work at your property. Grenoside is one of 118 towns and villages in Sheffield we cover. You can also see our page for Leeds, about 26 miles away.
All of S35 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Main Street, Vicarage Close and Vicarage Road. We also travel to Oughtibridge (2 miles west), Middlewood (2 miles south-west), Hillsborough (2 miles south), Worrall (2 miles south-west) and Wharncliffe Side (2 miles west). Further out, we also cover Sheffield (5 miles south), Netherthorpe (4 miles south), Upperthorpe (4 miles south), West End (4 miles south), Walkley (3 miles south) and Broomhall (5 miles south).
Landmarks near Grenoside
In Grenoside, that means homes near The Angel pub, Yewlands Academy and Chaucer School and the streets around them. Nearby too are Grenoside Community Primary School (under half a mile north) and St Mark's Church (less than half a mile north-west). Grenoside’s nearest station is Chapeltown station, roughly 2.1 miles north-east of the centre. Well-known places in the area include Sheffield Castle (4.2 miles south) and Northern General Hospital (2.7 miles south-east). Not far away are Greno Woods.
Bath repair in Grenoside, done in place
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, generally in a single visit. We work on roll-top & freestanding, cast iron enamel and pressed steel enamel, and the jobs we see most are an old repair that has yellowed or come loose and a cracked acrylic bath.
We stand behind the work with a one-year guarantee.
- Area
- Grenoside (S35)
- County
- Sheffield
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Towns and villages near Grenoside
What else we do in Grenoside
Questions from Grenoside
Can a cracked acrylic bath be fixed?
Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
When can I have a bath again?
Usually the day after. We’ll tell you the exact curing time when we finish.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
Can you repair a hole in a bath?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
Do you cover Grenoside?
Yes. We cover the whole UK and come to Grenoside and the rest of Sheffield. Send photos and we will quote, or call 0345 017 0787.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Prices and what affects them
Prices start from £95. There’s no charge for travel to Grenoside. The price comes down to:
- The size and number of damaged areas
- The colour and finish to match
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
Before you send pictures, these tips help us give you a firm price:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you’re under no obligation.
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. The job generally runs to a few hours, including clearing up.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
When to call us in Grenoside
A cracked acrylic bath generally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
Look out for any of the following:
- Hairline or through cracks in acrylic
- Holes from dropped items
- Deep scratches in acrylic
- A chip where the taps sit
Comparing quotes
- Whether the colour is mixed to match
- Whether cleaning and preparation are in the price
- Who will actually do the work
- What aftercare is recommended
Should you replace it?
A new bath brings a chain of other jobs: tiles along the rim typically crack when it comes out, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- Fixed prices from your pictures
- Technicians who travel to you, UK-wide
- We’ll tell you if it’s not worth repairing
- One visit for most repairs
Take a look at our prices page and resurfacing vs replacement cost guide.
Landlord and trade work in Grenoside
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
What a repair cannot fix
Some jobs are not right for a repair, including:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- Cracks in acrylic we can’t reach from underneath
Send us pictures and we will tell you honestly before you book.
What we work on
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Cover the bath during DIY or decorating
- Get any new chip repaired before it rusts
- If an acrylic bath flexes, have its feet adjusted
- A dripping tap stains enamel, so fix it early
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
About our accreditations · Every repair comes with a one-year guarantee.
