Sheffield · England
Bath chip & crack repair in Middlewood, Sheffield
Bath repair in Middlewood without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Repairs from £95
- Cracks in an acrylic bath
- Chips under the taps
Questions from Middlewood
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can you quote from pictures?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
Is a holed acrylic bath repairable?
Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
How long before I can use the bath?
Normally by the following day, depending on the repair.
How we handle bath repair in Middlewood
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for chips on the rim or sides and snagging damage from a refit, on roll-top & freestanding, pressed steel enamel and cast iron enamel.
You get a one-year guarantee, the same in Middlewood as everywhere else we work.
- Area
- Middlewood (S6, S35)
- Region
- Sheffield
- Cover
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Middlewood use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
When we would advise against a repair
We will not take on work that won’t last, so these are the limits:
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
- Flexing caused by a failed cradle or loose feet
Send us photos and we will tell you honestly.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Also near Middlewood
Also in Middlewood
Keeping it looking good
Once the work has cured, treat it gently:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Do not scrub with anything abrasive
- Have new chips seen to early
- Rinse it down after each bath
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What happens on the day
You do not need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. It typically takes a few hours, depending on the damage, and you are welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the following day.
Before we arrive
- Make sure the area is dry
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
Getting a price
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Signs you need bath repair in Middlewood
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal will start to rust.
These are the problems we’re asked about most:
- Impact holes in acrylic
- Chips along the edge of the bath
- An old repair that has yellowed or come loose
- Chips caused by builders
Questions to ask before you book
- What happens if the damage is worse than the photos show
- Whether the price covers travel
- How soon you can use it again
- Who turns up on the day
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Should you replace it?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Middlewood
- We’ll tell you if it’s not worth repairing
- One-year guarantee on every repair
- CHAS and Constructionline accredited
- Nothing taken out or refitted
Take a look at our prices page or resurfacing vs replacement cost guide.
About Middlewood
Middlewood is about 1 mile north of Malin Bridge, in Sheffield. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Middlewood is one of 118 places in Sheffield where we work. Our nearest city page is Leeds, about 27 miles away.
Here we cover the S6 and S35 postcode area. From Well Lane, Don Avenue and Harris Road or a nearby road, we can come to you. Close by, we cover Wadsley (1 mile south), Worrall (1 mile west), Hillsborough (1 mile south-east), Wisewood (1 mile south) and Oughtibridge (1 mile north-west). Within a short drive, we also cover Sheffield (4 miles south-east), Netherthorpe (3 miles south-east), West End (3 miles south-east), Broomhall (3 miles south-east), Chapeltown (3 miles north-east) and Highfield (4 miles south-east).
Around Middlewood
We visit homes around Yewlands Academy, Marlcliffe Community Primary School and Bradfield School and the streets around them. Also close by are Rose And Crown Public House And Attached Wall (0.6 miles south), Rivelin Valley Park (2 miles south) and Church At Middlewood Hospital (less than half a mile south-east). The closest station to Middlewood is Chapeltown station, roughly 3.7 miles north-east. Further afield, we also cover the area around Sheffield Castle (3.4 miles south-east) and Yorkshire Natural History Museum (1.4 miles south-east). Not far away are Greno Woods.
About our accreditations · Every repair comes with a one-year guarantee.
