Lancashire · England
Bath chip & crack repair in Grimsargh, Lancashire
We travel to Grimsargh for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A chipped rim or side
- A cracked acrylic bath
How it works
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a few hours. The room is left tidy and you will know when it can be used.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the next day.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Let us know about parking or access
- Tell us if there are stairs or a lift
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Advice
About our bath repair in Grimsargh
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can generally use the bath the following day. Whether it’s a hole punched through by something heavy and chips caused by builders, we can typically put it right, on pressed steel enamel, cast iron enamel and whirlpool & spa baths alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Grimsargh (PR2)
- Area hub
- Lancashire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What affects the price in Grimsargh
Prices start from £95. There is no area surcharge for Grimsargh. What changes the price is:
- Where the damage is and how we get to it
- The colour and finish to match
- The type of damage
- Any earlier repairs that need removing first
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
We price nearly every job from photos. This is what to send:
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire bath
- The postcode, so we can plan the visit
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
What you get with us
- No extra charge for your area
- Straight answers about what a repair can do
- We leave the room as we found it
- Free fixed quotes from pictures
Take a look at our prices page and resurfacing vs replacement cost guide.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
What we are called out for in Grimsargh
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the bath move.
It’s worth getting a quote if you see:
- Hairline or through cracks in acrylic
- Rust by the waste and overflow
- A hole punched through by something heavy
- Damage beneath the taps
Questions to ask before booking
- If travel is included in the price
- What the guarantee covers, and for how long
- What protection goes down before work starts
- What preparation is included
Also near Grimsargh
More services for Grimsargh
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
- Acrylic cracks with no access behind them
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Keeping it looking good
Simple care helps the repair last. Our advice:
- Protect the bath with a towel when doing jobs nearby
- Make sure an acrylic bath is firm underfoot
- Avoid scourers, wire wool and gritty cream cleaners
- Rinse it down after each bath
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
FAQs for Grimsargh
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Grimsargh.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Do you cover the whole of Lancashire?
We work UK-wide, so Grimsargh is covered. Prices do not change with location.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you quote from pictures?
Usually, yes. Clear photos let us give you a fixed quote without visiting.
How long does the repair take to cure?
Normally the next day. We’ll tell you the exact curing time when we finish.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If we need another angle, we will ask.
Covering Grimsargh
Grimsargh is about 2 miles south-west of Longridge, in Lancashire. We travel to customers in Grimsargh and nearby villages, so you do not need to take anything anywhere. Grimsargh is one of 482 towns and villages in Lancashire we cover. Our jobs stretch from Grimsargh to Manchester (about 28 miles away).
All of PR2 is covered. From Ploughmans Court, Alexander Place and Old Station Close or a nearby road, a technician can come to you. We also travel to Cow Hill (1 mile west), Haighton Green (1 mile west), Whittingham (1 mile north), Cumeragh Village (2 miles north-west) and Haighton Top (2 miles west). Further out, we also cover Preston (4 miles south-west), Chorley (11 miles south), Bamber Bridge (5 miles south), Accrington (11 miles east), Leyland (8 miles south) and Fulwood (4 miles west).
Around Grimsargh
We visit homes around St Michael's Church, St Cecilia's RC High School and Alston Hall College. Other local landmarks include Grimsargh St Michael's Church of England Primary School (less than half a mile south-west) and The Plough pub (within half a mile north-west). For rail, the closest station is Preston station, about 4.6 miles south-west. A little further out are Preston Castle (4.9 miles south-west) and Royal Preston Hospital (3.4 miles west). Not far away are Grimsargh Wetlands.
About our accreditations · Every repair comes with a one-year guarantee.
