Norfolk · England
Bath chip & crack repair in Guestwick, Norfolk
Bath repair for Guestwick, without a refit. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A chip where the taps sit
About Guestwick
Guestwick is about 10 miles north-east of Dereham, in Norfolk. Across the NR20 area, we carry out the work at your property. Guestwick is one of 797 towns and villages in Norfolk we cover.
Every address in NR20 is within our area. Neighbouring places we cover include Nethergate (2 miles north), Wood Dalling (2 miles east), Thurning (2 miles north-east), Hindolveston (2 miles north-west) and Briston (4 miles north). Further out, we also cover Norwich (15 miles south-east), Dereham (10 miles south-west), Sprowston (15 miles south-east), North Walsham (14 miles east), Sheringham (12 miles north-east) and Norwich Lanes (15 miles south-east).
Local landmarks in Guestwick
We visit homes around Church of St Peter and the streets around them. Not far away are Foxley Wood.
Bath repair at your home in Guestwick
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in a single visit. Common call-outs are for damage done while the bathroom was being fitted and an old repair that has yellowed or come loose, on pressed steel enamel, acrylic and whirlpool & spa baths.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Where
- Guestwick (NR20)
- County
- Norfolk
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath repair costs
Prices start from £95. You will know the full cost before you book. We look at:
- The type of damage
- The material
- How easy the damage is to reach
- How much damage there is
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from photos
You can normally get a fixed price without us visiting. To help us price it:
- A clear, close picture of the problem area
- One picture of the entire bath
- A coin beside the damage so we can judge size
- What it’s made of, if you know
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you’re under no obligation.
Repair or replace: which is better?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. Our prices are the same across the UK, so there’s no premium for Guestwick. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- We’ll tell you if it’s not worth repairing
- We leave the room as we found it
- Free fixed quotes from pictures
- Nothing taken out or refitted
Read our prices page or guide to resurfacing and replacement costs.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Places near Guestwick
Other services in Guestwick
Guestwick: your questions answered
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
What happens next?
We come back with a fixed price, plus dates. There’s no obligation to book.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
How long does the repair take to cure?
Normally the day after. We will tell you the exact curing time when we finish.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Can you redo an old repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
What we are called out for in Guestwick
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
Most people get in touch after spotting something like this:
- Rust by the waste and overflow
- A chip where the taps sit
- Scuffs and scratches in the surface
- Chips caused by builders
What your quote should include
- How the colour is matched
- How changes to the job are handled
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
The process
We work cleanly and quietly. Protection goes down first, then the job itself takes two to three hours for most chips. At the end we talk you through the curing time and the aftercare.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the following day.
Preparing for the visit
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What we can’t put right
We would rather lose a job than do one that won’t last, so these are the limits:
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
