Lincolnshire · England

Bath Repair in Guy's Head

Bath repair for Guy's Head, without a refit. Send us photos for a fixed price, then we come to you.

  • Repairs from £95
  • Holes from dropped items
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Guy's Head?

Work for landlords and builders

For developers and builders, we fix damage before handover. Several plots can be done in one visit.

We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.

Bath repair in Guy's Head, done in place

Most of our bath repairs take a few hours, and the bath is back in use the following day. You won’t need a plumber or tiler, because nothing is disconnected. Our technicians work on cast iron enamel, roll-top & freestanding and whirlpool & spa baths, and the jobs we see most are a hole punched through by something heavy and a chipped rim or side.

All our work comes with a one-year guarantee, wherever you are in Lincolnshire.

Before and after: a damaged acrylic bath corner repaired in place
Where
Guy's Head (PE12)
County
Lincolnshire
Cover
12 months on all our work
Price
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Aftercare tips

Most damage we see is avoidable. A few tips:

  • Stick to mild cleaners and a soft cloth
  • Check that an acrylic bath does not move when you stand in it
  • Put a towel in the bath if you are working above it
  • Rinse it down after each bath

Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.

Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.

DIY repairs versus a professional job

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

What a repair can’t fix

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Wear across the entire surface, which needs re-enamelling
  • Rust that has eaten right through a steel bath
  • Flexing caused by a failed cradle or loose feet

Send us pictures and we’ll tell you honestly.

Materials we repair

  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel

Repair or replace in Guy's Head?

Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Guy's Head. The job itself decides the price: the material, the amount of damage and how many items.

Why book with us

  • CHAS, Constructionline and SafeContractor accredited
  • A year’s guarantee on all work
  • Colour-matched on site
  • Free fixed quotes from pictures

See our full price list or resurfacing vs replacement cost guide.

Guy's Head and the surrounding area

Guy's Head is about 10 miles west of King's Lynn, in Lincolnshire. Anywhere in PE12, we carry out the work at your property. Guy's Head is one of 732 towns and villages in Lincolnshire we cover.

Every address in PE12 is covered, from the main roads to the quietest streets. Close by, we cover Gedney Drove End (3 miles north-west), Sutton Bridge (3 miles south), Little Sutton (3 miles south-west), Lutton Gowts (3 miles west) and Lutton (3 miles west). We also work in nearby towns such as Boston (15 miles north-west), Spalding (15 miles west), Holbeach (8 miles west), Pinchbeck (15 miles west), Staniland (15 miles north-west) and Kirton (14 miles north-west).

Map of Guy's Head © OpenStreetMap contributors

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

What we do, step by step

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for two to three hours for most chips. Before we go, we will explain when it can be used and what to avoid for the first few days.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Let us know about parking or access
  • Open a window if you can

How to get a price

Upload pictures of the damage and a wider shot of the entire item, with your PE12 postcode, and we’ll come back with a fixed quote.

Get a fixed price

Advice

What affects the price in Guy's Head

Repairs from £95. We price every job individually, from your photos. The main factors are:

  • Any earlier repairs that need removing first
  • Doing more than one item at once
  • How easy the damage is to reach
  • The material

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Quotes from your pictures

When you take your pictures, these tips help us give you a firm price:

  • One picture of the entire bath
  • Details of any past repairs
  • Something in shot to show the size
  • A close-up of the damage, in focus

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Questions from Guy's Head

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

Is a bath repair permanent?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

How invisible is a bath repair?

On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.

Do you work in Guy's Head?

Yes. We cover the whole UK and come to Guy's Head. Send us photos for a fixed quote, or call 0345 017 0787.

Do you hold any accreditations?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can a cracked acrylic bath be fixed?

Generally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.

What if the damage is worse than the photos show?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

Can you repair several things at once?

Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.