Shropshire · England
Bath Repair for Hadnall homes
Bath repair for Hadnall, without a refit. Get a fixed price from your pictures, then we come to you.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rust spots around the plughole
Questions from Hadnall
How long before I can use the bath?
Most baths can be used the following day. We will tell you the exact curing time when we finish.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What areas do you cover?
We cover the entire UK, including Hadnall and the rest of Shropshire. Just include your postcode and we’ll offer you dates.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can a cracked acrylic bath be fixed?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Bath repair at your home in Hadnall
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, usually in a single visit. Common call-outs are for a cracked acrylic bath and deep scratches in acrylic, in pressed steel enamel, cast iron enamel and roll-top & freestanding.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Hadnall (SY4)
- County
- Shropshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a morning or an afternoon, depending on what we find, and we finish by cleaning up and talking you through the result.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Keep abrasive pads and gritty cleaners away from the bath
- Have new chips seen to early
- If an acrylic bath flexes, have its feet adjusted
- Protect the bath with a towel when doing jobs nearby
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
What bath repair costs
Repairs from £95. We charge the same across the UK, including Hadnall. The price reflects:
- The colour and finish to match
- What the surface is made of
- How many areas need work
- Any earlier repairs that need removing first
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
Before you send pictures, a few simple things make all the difference:
- Something in shot to show the size
- The postcode, so we can plan the visit
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
Send us pictures of the damage and a wider shot of the entire item, and tell us you are in Hadnall, and we will reply with a fixed quote.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair will not do:
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Places near Hadnall
Also in Hadnall
Hadnall and nearby
Hadnall is about 5 miles north of Shrewsbury, in Shropshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover 433 places in Shropshire. We work right across the region, from Hadnall to Birmingham (40 miles away).
Here we cover the SY4 postcode area. You’ll find streets such as Station Road, Shrewsbury Road and Abbot Drive, all of which we cover. We also travel to Haston (1 mile north-west), Upper Battlefield (1 mile south), Sansaw Heath (2 miles north-west), Preston Gubbals (2 miles west) and Yorton Heath (2 miles north-west). Within a short drive, we also cover Shrewsbury (5 miles south), Oswestry (15 miles west), Madeley (15 miles south-east), Market Drayton (13 miles north-east), Coleham (5 miles south) and Kingsland (5 miles south).
What’s near Hadnall
In Hadnall, that means homes near Church of St Mary Magdalene and Hadnall CofE Primary School. Hadnall’s nearest station is Yorton station, roughly 2.6 miles north-west. Nearby you will also find Royal Shrewsbury Hospital (5.8 miles south-west) and Moreton Corbet Castle (3.1 miles north-east). For a walk, there is Haughmond Hill.
Repairing versus replacing in Hadnall
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Hadnall. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- Same prices wherever you are
- One visit for most repairs
- We come to you, anywhere in the UK
- Colour-matched on site
See our full price list or resurfacing vs replacement cost guide.
Do you need bath repair in Hadnall?
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Most people contact us after spotting something like this:
- A cracked acrylic bath
- Chips under the taps
- Rust spots around the plughole
- Damage done while the bathroom was being fitted
Before booking anyone
- Whether there are any call-out or travel charges
- What protection goes down before work starts
- Whether they match the colour on site
- What happens if they find more damage
About our accreditations · Every repair comes with a one-year guarantee.
