Warwickshire · England
Bath Repair for Hampton on the Hill homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Hampton on the Hill, carried out at your home and guaranteed for a year.
- Repairs from £95
- Deep scratches in acrylic
- Holes from dropped items
About our bath repair in Hampton on the Hill
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include rust by the waste and overflow and a failed DIY repair that’s discoloured or lifting, in roll-top & freestanding, pressed steel enamel and whirlpool & spa baths.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Where
- Hampton on the Hill (CV35)
- Region
- Warwickshire
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Repairs from £95. There is no charge for travel to Hampton on the Hill. The price comes down to:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- The size and number of damaged areas
- Whether we combine several jobs
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Most quotes are done from pictures alone. To make it quick:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- A picture taken from further back
- A coin beside the damage so we can judge size
To get a price, send two or three photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Towns and villages near Hampton on the Hill
More services for Hampton on the Hill
Landlords, agents and businesses in Hampton on the Hill
We work for landlords, letting agents and housing providers in Hampton on the Hill as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Get any new chip repaired before it rusts
- Avoid scourers, wire wool and gritty cream cleaners
- Make sure an acrylic bath is firm underfoot
- A dripping tap stains enamel, so fix it early
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
Repair or replace in Hampton on the Hill?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why book with us
- A fixed quote before booking
- Everything repaired in place
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
Take a look at our prices page and guide to resurfacing and replacement costs.
Covering Hampton on the Hill
Hampton on the Hill is about 2 miles west of Warwick, in Warwickshire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Hampton on the Hill is one of 324 towns and villages in Warwickshire where we work. Our nearest city page is Birmingham, about 18 miles away.
We work across CV35 and the streets around it. You will find streets such as Old School Lane, Hampton Croft and Henley Road, and we cover them all. We also travel to Hampton Magna (1 mile north-east), Lower Norton (1 mile west), Longbridge (1 mile south-east), Sherbourne (1 mile south) and Hatton (2 miles north). Within a short drive, we also cover Royal Leamington Spa (4 miles east), Stratford-upon-Avon (6 miles south-west), Bedworth (15 miles north-east), Leamington Spa (4 miles east), Kenilworth (6 miles north-east) and Fordbridge (15 miles north).
Around Hampton on the Hill
Around Hampton on the Hill, we work in homes near Budbrooke Primary School, Church of St Charles and Aylesford School and the streets around them. For rail, the closest station is Warwick Parkway station, about 1.2 miles north-east. Other landmarks nearby include Warwick Castle (2 miles east) and St Michael's Hospital (1.9 miles north-east).
FAQs for Hampton on the Hill
I tried a repair kit. Can you fix it?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Do you repair coloured baths?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can you repair a crack in an acrylic bath?
Typically, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
What areas do you cover?
Across the UK, so Hampton on the Hill is covered. Our prices are the same everywhere.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- A steel bath rusted through
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
Signs you need bath repair in Hampton on the Hill
A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
It’s worth getting a quote if you see:
- Damage beneath the taps
- Impact holes in acrylic
- Chips along the edge of the bath
- Scratches you can feel with a fingernail
What your quote should include
- Whether there are any call-out or travel charges
- What prep work is covered
- How the room is protected while they work
- What aftercare is recommended
How the visit works
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and we start. It normally takes a few hours, depending on the damage.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the following day.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
How to get a price
Send us photos of the damage and one of the entire item, with your CV35 postcode, and we will reply with a fixed price.
Related advice
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
