Warwickshire · England
Bath Repair in Sherbourne
Fixed-price bath repair in Sherbourne and the surrounding area, generally in one visit and guaranteed for a year.
- Repairs from £95
- A chipped rim or side
- Chips caused by builders
Bath repair at your home in Sherbourne
A typical bath repair is a few hours’ work, and the bath is back in use the day after. You won’t need a plumber or tiler, because the bath doesn’t move. Whether it’s damage done while the bathroom was being fitted and a chipped rim or side, we can typically put it right.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Area
- Sherbourne (CV35)
- County
- Warwickshire
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Sherbourne
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Is a cracked acrylic bath repairable?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Warwickshire.
Do you cover the entire of Warwickshire?
We cover the whole UK, including Sherbourne and the rest of Warwickshire. Just include your postcode and we’ll confirm dates.
How much does bath repair cost in Sherbourne?
Repairs from £95. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
How the visit works
The work is clean and fairly quiet. Protection goes down first, then the job itself takes a morning or an afternoon. Before we leave, we explain how soon it can be used and how to care for it.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can normally use the bath the following day.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
How to get a price
Email us photos of the damage and one of the entire item, with your CV35 postcode, and we will reply with a fixed quote.
Advice
Sherbourne and the surrounding area
Sherbourne is about 3 miles south-west of Warwick, in Warwickshire. Across the CV35 area, we come to you. Sherbourne is one of 324 towns and villages in Warwickshire we cover. Our jobs stretch from Sherbourne to Birmingham (19 miles away).
Here we cover the CV35 postcode area. Jobs here include addresses on Church Road, Vicarage Lane and Watery Lane and the roads around them. If you’re just outside Sherbourne, we cover Longbridge (1 mile north-east), Barford (1 mile south-east), Hampton on the Hill (1 mile north), Hampton Magna (2 miles north) and Heath End (2 miles west). We also work in nearby towns such as Warwick (3 miles north-east), Royal Leamington Spa (5 miles north-east), Stratford-upon-Avon (6 miles south-west), Leamington Spa (4 miles north-east), Kenilworth (7 miles north) and Southam (10 miles east).
Near you in Sherbourne
Our clients here include homes close to Church of All Saints, Aylesford School and Joseph Arch Public House. The closest station to Sherbourne is Warwick Parkway station, about 2.2 miles north of the centre. A little further out are Fulbrook Castle (0.9 miles south-west) and Market Hall Museum (2.2 miles north-east).
Why repair rather than replace?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in a single visit. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why Sherbourne clients choose us
- Honest advice, even when it means no job
- Normally one visit, start to finish
- Fixed prices from your photos
- No extra charge for your area
Take a look at our prices page and guide to resurfacing and replacement costs.
Do you need bath repair in Sherbourne?
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
It’s worth getting a quote if you see:
- Damage done while the bathroom was being fitted
- Chips on the rim or sides
- Rusty patches near the plughole
- A kit repair that didn’t last
What to look for in a quote
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
- What happens if they find more damage
- When it can be used again
Work for landlords and builders
If you manage property in Sherbourne, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What affects the price in Sherbourne
Prices start from £95. We do not charge extra for travel to Sherbourne. The price comes down to:
- How much damage there is
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- Whether we combine several jobs
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Send photos for a quote
Good photos mean an accurate price. Here’s what helps:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- One sharp close-up of the damage
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.
Nearby places to Sherbourne
What else we do in Sherbourne
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Aftercare tips
So the finish stays in good condition for years:
- Don’t scrub with anything abrasive
- Cover the bath during DIY or decorating
- Check that an acrylic bath doesn’t move when you stand in it
- Don’t leave a fresh chip for long
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
About our accreditations · Every repair comes with a one-year guarantee.
