Dorset · England
Bath Repair for Hamworthy homes
Problem with your bath in Hamworthy? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Rust by the waste and overflow
- Chips on the rim or sides
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Rust that has eaten right through a steel bath
- Wear across the whole surface, which needs re-enamelling
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
How we handle bath repair in Hamworthy
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair cast iron enamel, whirlpool & spa baths and acrylic, and common reasons people get in touch are damage beneath the taps and a cracked acrylic bath.
You get a one-year guarantee, the same in Hamworthy as everywhere else we work.
- Where
- Hamworthy (BH15, BH16)
- Area hub
- Dorset
- Cover
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
For anyone letting property in or around Hamworthy, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
FAQs for Hamworthy
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
How much does bath repair cost in Hamworthy?
Repairs from £95. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
How long before I can use the bath?
Normally by the following day, depending on the repair.
Do you cover the whole of Dorset?
Everywhere in the UK, Hamworthy included. There is no extra charge for travel.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Dorset.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Towns and villages near Hamworthy
What else we do in Hamworthy
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
About Hamworthy
Hamworthy is about 2 miles west of Poole, in Dorset. Jobs in Hamworthy are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Hamworthy is one of 462 towns and villages in Dorset where we work.
Every address in BH15 and BH16 is covered, from the main roads to the quietest streets. Streets in the area include Lake Road, Hoyal Road and Symes Road, all of which we cover. If you are just outside Hamworthy, we cover Turlin Moor (1 mile west), Upton (2 miles north-west), Creekmoor (2 miles north), Lytchett Minster (2 miles north-west) and Post Green (3 miles north-west). We also work in nearby towns such as Christchurch (11 miles east), Wimborne Minster (6 miles north), Blandford Forum (12 miles north-west), Verwood (12 miles north-east), Ferndown (8 miles north-east) and Broadstone (3 miles north).
Near you in Hamworthy
Our customers here include homes close to St Michael, Hamworthy Park Junior School and Carter Community School. Other local landmarks include The Red Lion pub (under half a mile east) and Poole Park (1.7 miles east). The closest station to Hamworthy is Hamworthy station, about 0.5 miles north-west of the centre. Further afield, we also cover the area around Poole Hospital (1.6 miles east) and Brownsea Castle (3.2 miles south-east). Not far away are Beacon Hill and Ham Common (LNR).
- Parks and local facilities nearby include Poole (1.2 miles east)
When to call us in Hamworthy
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
Look out for any of the following:
- Rusty patches near the plughole
- Impact holes in acrylic
- Damage beneath the taps
- A chipped rim or side
What your quote should include
- How to look after the finish
- What the guarantee covers, and for how long
- Whether they match the colour on site
- How the room is protected while they work
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Aftercare tips
Looking after the surface is easy:
- Keep abrasive pads and gritty cleaners away from the bath
- Do not leave a fresh chip for long
- If an acrylic bath flexes, have its feet adjusted
- Keep metal cans and razors off the surface
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
Repairing versus replacing in Hamworthy
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Why Hamworthy customers choose us
- We’ll tell you if it’s not worth repairing
- Free fixed quotes from pictures
- One-year guarantee on every repair
- Typically one visit, start to finish
Take a look at our full price list and guide to resurfacing and replacement costs.
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take a morning or an afternoon, tidy-up included.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, usually by the following day, the bath is ready to use.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Make sure the area is dry
- Keep pets and children out of the room while we work
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
