Lincolnshire · England
Bath Repair for Hannah homes
Damaged bath in Hannah? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Rust spots around the plughole
- Scuffs and scratches in the surface
Bath repair in Hannah, done in place
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Whether it’s chips under the taps and deep scratches in acrylic, we can help, whatever the material.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Where
- Hannah (LN13)
- County
- Lincolnshire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Hannah
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. Compared with replacing, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- Dust sheets down, tidy finish
- Fixed prices from your pictures
- CHAS, Constructionline and SafeContractor accredited
- Colours mixed by hand to suit your surface
Read our pricing and resurfacing vs replacement cost guide.
Signs you need bath repair in Hannah
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Common reasons people in Hannah contact us include:
- Holes from dropped items
- Damage done while the bathroom was being fitted
- Chips under the taps
- Cracks in an acrylic bath
What to look for in a quote
- The length of the guarantee and what it covers
- How your room will be protected
- Is the price fixed, and does it include VAT?
- What happens if they find more damage
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Rust that has eaten right through a steel bath
- Cracks in acrylic we cannot reach from underneath
- A bath worn all over, where resurfacing makes more sense
Send us photos and we will tell you honestly before you book.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
About Hannah
Hannah is about 10 miles north of Skegness, in Lincolnshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We cover all 732 towns and villages across Lincolnshire.
Our visits in LN13 work the same way as everywhere else we cover. Close by, we cover Markby (1 mile west), Huttoft (2 miles south), Bilsby (2 miles south-west), Mumby (3 miles south) and Cumberworth (3 miles south). Larger places within reach include Louth (12 miles north-west), Skegness (10 miles south), Mablethorpe (4 miles north), Spilsby (10 miles south-west), Alford (4 miles south-west) and Chapel St Leonards (6 miles south-east).
Near you in Hannah
Locally, our jobs take us to homes close to Church of St Andrew. Further afield, we also cover the area around Alford and District War Memorial Cottage Hospital (4 miles south-west).
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams in Lincolnshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Cover the bath during DIY or decorating
- Keep metal cans and razors off the surface
- Check that an acrylic bath does not move when you stand in it
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Common questions in Hannah
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Do you work in Hannah?
We do. We send a technician to Hannah for every job, with no extra charge for travel.
Can you repair a failed DIY repair?
Regularly. We strip it out, deal with any rust and repair it again.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What information do you need?
Use the quote form or ring 0345 017 0787.
How long before I can use the bath?
Normally the day after. We confirm the time before we leave.
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Towns and villages near Hannah
What else we do in Hannah
What bath repair costs
Prices start from £95. A fixed quote means you know the cost before you book. We take into account:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- Unusual colours or finishes
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from pictures
When you take your pictures, a few simple things make all the difference:
- Any earlier repairs or coatings
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say right away if a repair is the right fix.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a few hours. If anything looks different from your photos, we’ll talk to you before going ahead.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the day after.
How to prepare
- Ensure the area is dry
- Clear the area around the damage
- Tell us about any previous repairs or coatings
Ask for a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
