Norfolk · England
Bath Repair in Hardley Street
We travel to Hardley Street for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- Deep scratches in acrylic

Landlord and trade work in Hardley Street
If you manage property in Hardley Street, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
We are used to working with agents and managing companies. Send the address, photos and access details.
About our bath repair in Hardley Street
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. We regularly repair roll-top & freestanding, pressed steel enamel and acrylic, and common reasons people contact us are chips along the edge of the bath and scuffs and scratches in the surface.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

- Where
- Hardley Street (NR14)
- Area hub
- Norfolk
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Hardley Street
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can rust on a bath be repaired?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Looking after it afterwards
How the surface is treated afterwards matters:
- Keep abrasive pads and gritty cleaners away from the bath
- Put a towel in the bath if you’re working above it
- Stick to mild cleaners and a soft cloth
- Rinse the bath after use, especially in hard water areas
There is nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
What we’re called out for in Hardley Street
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.
Send us a picture if you notice any of these:
- A kit repair that didn’t last
- Snagging damage from a refit
- Scuffs and scratches in the surface
- Damage beneath the taps
What your quote should include
- Whether there are any call-out or travel charges
- Who turns up on the day
- How changes to the job are handled
- What aftercare is recommended
How it works
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for two to three hours for most chips from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can normally use the bath the following day.
Getting ready for the visit
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
- Make sure the room can be ventilated
Getting a price
The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll say immediately whether it can be repaired.
Advice
Honest limits
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Acrylic cracks with no access behind them
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
About Hardley Street
Hardley Street is about 9 miles west of Gorleston-on-Sea, in Norfolk. We visit homes and businesses in Hardley Street and the surrounding area, so nothing has to leave your home. Our technicians cover 797 places across Norfolk.
Every address in NR14 is covered, from the main roads to the quietest streets. Streets in the area include Church Lane and Hardley Street, all of which we cover. Neighbouring places we cover include Nogdam End (1 mile east), Heckingham (1 mile south), Cantley (2 miles north), Limpenhoe (2 miles north-east) and Hales (2 miles south). Further out, we also cover Norwich (11 miles north-west), Great Yarmouth (10 miles east), Gorleston-on-Sea (9 miles east), Sprowston (11 miles north-west), Thorpe St Andrew (9 miles north-west) and Southtown (9 miles east).
Landmarks near Hardley Street
Typical jobs here are in homes near Church of St Margaret and Hobart High School. The closest station to Hardley Street is Cantley station, about 1.7 miles north of the centre. A little further out are Claxton Castle (3.3 miles north-west). The countryside around Hardley Street includes Buckenham Marshes RSPB reserve.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Towns and villages near Hardley Street
What else we do in Hardley Street
What bath repair costs
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- Whether it’s a chip, crack, burn or wear
- The material
- Whether we combine several jobs
- How easy the damage is to reach
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- Any details about the material
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.

