Hampshire · England
Bath Repair in Haslar
Chip and crack repairs to enamel, acrylic and cast iron baths in Haslar, carried out at your home and guaranteed for a year.
- Repairs from £95
- Chips on the rim or sides
- Rust by the waste and overflow
About Haslar
Haslar is about 2 miles south-east of Gosport, in Hampshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We cover all 683 towns and villages in Hampshire, from the larger towns to small villages. You can also see our page for London, about 67 miles away.
Our visits in PO12 are booked in the same way as anywhere else. We regularly work on streets such as Froude Road, Military Road and Monckton Road and the roads around them. Other places close to Haslar include Clayhall (1 mile north-west), Alverstoke (1 mile west), Portsmouth Point (1 mile north-east), Privett (2 miles north-west) and Portsea (2 miles north-east). Within a short drive, we also cover Havant (8 miles north-east), Fareham (6 miles north-west), Horndean (10 miles north-east), Hedge End (12 miles north-west), Waterlooville (8 miles north-east) and Purbrook (7 miles north-east).
Near you in Haslar
Around Haslar, we work in homes near St Vincent College, Haselworth Primary School and The Fighting Cocks pub, among other places. Nearby too are Bay House School (1.6 miles west) and St Francis (under half a mile north-west). The closest station to Haslar is Portsmouth Harbour station, about 1.5 miles north-east. A little further out are Southsea (1.6 miles east) and Southsea Castle (1.8 miles east). Open spaces near Haslar include West of the River Alver.
Bath repair at your home in Haslar
Most of our bath repairs take a few hours, and the bath is back in use the following day. There is no need to book a plumber or tiler, because nothing is disconnected. We work on cast iron enamel, acrylic and pressed steel enamel, and common reasons people get in touch are damage beneath the taps and rust by the waste and overflow.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Haslar (PO12)
- County
- Hampshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Haslar
More services for Haslar
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Your questions about bath repair in Haslar
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first, so let us know about it.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Do you cover the whole of Hampshire?
Across the UK. Our prices are the same everywhere.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
How much does bath repair cost in Haslar?
Prices start from £95. We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your PO12 postcode.
Should you replace it?
People frequently assume a cracked or chipped bath has to come out. Typically it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why Haslar customers choose us
- Rooms protected and left tidy
- Free fixed quotes from pictures
- A year’s guarantee on all work
- Technicians who travel to you, UK-wide
Read our prices page or bath cost comparison.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair won’t do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we cannot get to from below
- Flexing caused by a failed cradle or loose feet
Send us photos and we’ll tell you honestly.
Materials we work on in Haslar
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
The process
Arrival times are agreed in advance, so you know when to expect us. On site, it takes a morning or an afternoon for most jobs. The room is left tidy.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Tell us about any previous repairs or coatings
- Let us know about parking or access
- Ensure the room can be ventilated
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Related advice
What affects the price in Haslar
Repairs from £95. Prices are worked out job by job. The main factors are:
- How much damage there is
- How many items we do on one visit
- What kind of damage it is
- Access to the area
The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- A picture taken from further back
- The material, if you know it
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
What we are called out for in Haslar
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
These are the problems we’re asked about most:
- Damage done while the bathroom was being fitted
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
- Damage beneath the taps
What your quote should include
- Who will actually do the work
- How your room will be protected
- How to care for the finish
- A fixed quote, and whether VAT is included
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Cover the bath during DIY or decorating
- Give the bath a quick rinse after use
- Clean with warm water and a mild detergent
- Store metal items away from the bath
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
About our accreditations · Every repair comes with a one-year guarantee.
