Northamptonshire · England
Bath Repair in Haversham
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Haversham, with a one-year guarantee on every repair.
- Repairs from £95
- Chips caused by builders
- Hairline or through cracks in acrylic
Your questions about bath repair in Haversham
What does bath repair cost?
Repairs from £95. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
Is a bath repair permanent?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
What areas do you cover?
Everywhere in the UK, Haversham included. Travel is included in the price.
Can rust on a bath be repaired?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Bath repair in Haversham without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. We regularly repair whirlpool & spa baths, pressed steel enamel and acrylic, and the jobs we see most are a chip where the taps sit and chips on the rim or sides.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Haversham (MK19)
- Area hub
- Northamptonshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Haversham and the surrounding area
Haversham is about 3 miles north-west of Milton Keynes, in Northamptonshire. We visit clients in Haversham and nearby villages, so you don’t need to take anything anywhere. We cover 364 places across Northamptonshire. You can also see our page for London, about 50 miles away.
All of MK19 is within our area. Local streets include High Street, Keppel Avenue and Wolverton Road, and we cover them all. Other places close to Haversham include Wolverton (1 mile south-west), Old Wolverton (1 mile south-west), Castlethorpe (2 miles north-west), Cosgrove (2 miles west) and Stony Stratford (2 miles south-west). We also work in nearby towns such as Northampton (12 miles north), Brackley (15 miles west), Towcester (8 miles north-west), Moulton (15 miles north), East Hunsbury (10 miles north-west) and Wootton (9 miles north).
What’s near Haversham
Around Haversham, we work in homes near The Radcliffe School, Haversham Village School and The Radcliffe School and the streets around them. Nearby too are The Greyhound pub (0.6 miles east) and Parish Church of St Mary (0.5 miles east). The closest station to Haversham is Wolverton station, roughly 0.7 miles south. Nearby you will also find Badminton Museum (2.8 miles south) and Milton Keynes University Hospital (4.6 miles south-east). Not far away are Lodge Lake and Little Linford Wood.
Places near Haversham
Also in Haversham
Landlords, agents and businesses in Haversham
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
If you manage property in Haversham, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
What bath repair costs
Prices start from £95. Every quote is fixed and free. What we take into account:
- Access to the area
- Any earlier repairs that need removing first
- How many areas need work
- Doing more than one item at once
We charge the same wherever you are, so there’s no premium for Haversham. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your photos
Photographing the damage takes a minute. Try to send:
- The material, if you know it
- Any earlier repairs or coatings
- One picture of the whole bath
- One sharp close-up of the damage
Upload a picture of the damage and a wider shot of the entire item, with your MK19 postcode, and we’ll reply with a fixed price.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
How it works
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a few hours, and you’re welcome to carry on with your day while we work.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
Common problems we fix in Haversham
Rust normally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
If you can see any of these, send us a picture:
- Rusty patches near the plughole
- Holes from dropped items
- Hairline or through cracks in acrylic
- Chips caused by builders
Comparing quotes
- Whether there are any call-out or travel charges
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
- Whether a trained technician does the job
How to care for the repair
After the repair has cured, a few habits help it last:
- Rinse it down after each bath
- Store metal items away from the bath
- Get any new chip repaired before it rusts
- Protect the bath with a towel when doing jobs nearby
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
When a repair isn’t the answer
A repair isn’t right for every job, including:
- A bath worn all over, where resurfacing makes more sense
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
