South Gloucestershire · England
Bath Repair for Hawkesbury Upton homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Hawkesbury Upton and across South Gloucestershire. Free, fixed quotes from your pictures.
- Repairs from £95
- An old repair that has yellowed or come loose
- Chips along the edge of the bath
Questions from Hawkesbury Upton
How much does bath repair cost in Hawkesbury Upton?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
How long does the repair take to cure?
Most baths can be used the day after. We will tell you the exact curing time when we finish.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
Is a cracked acrylic bath repairable?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Bath repair in Hawkesbury Upton, done in place
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. If you are dealing with damage done while the bathroom was being fitted and a chipped rim or side, we can normally put it right, whatever the material.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Hawkesbury Upton (GL9)
- Area hub
- South Gloucestershire
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
We will always be straight with you, so here’s what a repair won’t do:
- Acrylic cracks with no access behind them
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Hawkesbury Upton
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Signs you need bath repair in Hawkesbury Upton
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Common reasons people in Hawkesbury Upton contact us include:
- Chips under the taps
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
- An old repair that has yellowed or come loose
What to look for in a quote
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
Hawkesbury Upton and the surrounding area
Hawkesbury Upton is about 5 miles north-east of Yate, in South Gloucestershire. From the centre of Hawkesbury Upton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Hawkesbury Upton is one of 110 towns and villages in South Gloucestershire where we work. We work right across the region, from Hawkesbury Upton to Birmingham (about 64 miles away).
Our visits in GL9 work the same way as everywhere else we cover. You will find streets such as High Street, Park Street and Hunters Mead, and we cover them all. Nearby, we also work in Dunkirk (1 mile south-east), Petty France (1 mile south-east), Horton (2 miles south-west), Totteroak (3 miles south-west) and Wickwar (4 miles west). We also work in nearby towns such as Kingswood (12 miles south-west), Mangotsfield (10 miles south-west), Yate (5 miles south-west), Fishponds (12 miles south-west), Bradley Stoke (11 miles west) and Thornbury (9 miles west).
What’s near Hawkesbury Upton
We visit homes around Parish Church of St Mary the Virgin, The Fox Inn and Hawkesbury Church of England Primary School. The countryside around Hawkesbury Upton includes Nind Nature Reserve.
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours, depending on the damage from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
Ask for a price
To get a price, send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Advice
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in South Gloucestershire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
If you manage property in Hawkesbury Upton, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
Prices and what affects them
Prices start from £95. Every quote is fixed and free. What we look at:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- What kind of damage it is
- How many areas need work
Our prices are the same across the UK, so there is no premium for Hawkesbury Upton. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your photos
Phone pictures are fine. Make sure they show:
- Any earlier repairs or coatings
- The material, if you know it
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Fix dripping taps early to stop staining and limescale
- Keep metal cans and razors off the surface
- Get any new chip repaired before it rusts
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Towns and villages near Hawkesbury Upton
What else we do in Hawkesbury Upton
About our accreditations · Every repair comes with a one-year guarantee.
