Devon · England
Bath Repair for Heavitree homes
Bath repair in Heavitree without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Scratches you can feel with a fingernail
- A failed DIY repair that is discoloured or lifting
Bath repair in Heavitree, done in place
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on pressed steel enamel, acrylic and cast iron enamel, and people most frequently call us about damage done while the bathroom was being fitted and impact holes in acrylic.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Where
- Heavitree (EX1, EX2, EX4)
- Region
- Devon
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Get a dripping tap fixed promptly
- Protect the bath with a towel when doing jobs nearby
- Keep abrasive pads and gritty cleaners away from the bath
- Get any new chip repaired before it rusts
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Work done at your home or business
- No need to remove anything
- Honest advice, even when it means no job
See our prices page or guide to resurfacing and replacement costs.
Landlords, agents and businesses in Heavitree
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We’re used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
How the visit works
Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. Allow a few hours, depending on the damage, and we’ll keep you posted as we go.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Advice
Also near Heavitree
Also in Heavitree
When we would advise against a repair
To be straight with you, some problems need a different fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that moves underfoot, until its support is fixed
- Water coming from the waste or taps rather than the bath
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
Covering Heavitree
Heavitree is about 1 mile east of Exeter, in Devon. We agree a date that works for you, and you’ll know when to expect us, so you are not left waiting in all day. Our technicians cover 586 places in Devon.
All of EX1, EX2 and EX4 is covered. Whether you live on Hope Road, Saxon Road and Wykes Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Wonford (1 mile south-east), Exeter (1 mile west), Polsloe (1 mile north), St Sidwells (1 mile north-west) and Larkbeare (1 mile west). Within a short drive, we also cover Exmouth (8 miles south-east), Newton Abbot (14 miles south), Tiverton (13 miles north), Teignmouth (12 miles south), Sidmouth (12 miles east) and Honiton (15 miles east).
Near you in Heavitree
Locally, our jobs take us to homes close to The Horse and Groom Public House, Exeter School and Sacred Heart Church, among other places. Other local landmarks include St Michael's Church of England Primary Academy (less than half a mile north), Ludwell Valley Park (0.9 miles south-east), Church of Saint Michael and All Angels (under half a mile south-west) and Exeter University Library (1.6 miles north-west). For rail, the closest station is Polsloe Bridge station, roughly 0.7 miles north of the centre. A little further out are Wonford House Hospital (within half a mile south) and Rougemont Castle (1.1 miles west). Green spaces nearby include Bowling Green Marsh RSPB reserve.
- Nearby schools include St Peter's Church of England Aided School (1 mile east)
Common questions in Heavitree
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
How do I get a price for bath repair in Heavitree?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Can you repair a hole in a bath?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
When can I have a bath again?
Normally the following day. We confirm the time before we leave.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
Do you need bath repair in Heavitree?
A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move.
The most common problems we are called about are:
- Rusty patches near the plughole
- Scratches you can feel with a fingernail
- A failed DIY repair that’s discoloured or lifting
- Chips under the taps
What your quote should include
- If travel is included in the price
- Whether the colour is mixed to match
- How the room is protected while they work
- A fixed quote, and whether VAT is included
About our accreditations · Every repair comes with a one-year guarantee.
