Cornwall · England

Bath chip & crack repair in Helland, Cornwall

Damaged bath in Helland? We put it right where it is, match it on site and guarantee the work for a year.

  • Repairs from £95
  • Impact holes in acrylic
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Helland?

Bath repair in Helland without replacing anything

A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. Whether it’s holes from dropped items and chips on the rim or sides, we can help.

Every job is backed for twelve months. We return to put right any problem with the work.

Area
Helland (PL30)
Area hub
Cornwall
Cover
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

When we’d advise against a repair

It helps to know what we cannot do:

  • A bath worn all over, where resurfacing makes more sense
  • Acrylic cracks with no access behind them
  • A steel bath rusted through

Not sure? Send pictures and we will give you a straight answer before booking.

Materials we repair

  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

How we price bath repair

Prices start from £95. Each job gets its own fixed price. These are the things that affect it:

  • Whether old repairs or coatings need taking off
  • The size and number of damaged areas
  • The material and finish
  • What kind of damage it is

We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from pictures

Two or three clear pictures are usually enough. Try to include:

  • A photo taken from further back
  • One sharp close-up of the damage
  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

What we do, step by step

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Preparing for the visit

  • Keep a parking space free if you can
  • Tell us about any previous repairs or coatings
  • Tell us about parking, stairs or access

Getting a price

Email us a photo of the damage and one of the whole item, and tell us you’re in Helland, and we will come back with a fixed quote.

Send photos for a quote

Read more

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Questions from Helland

How long before I can use the bath?

Typically the day after. We will tell you the exact curing time when we finish.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.

Can landlords book you?

Yes, often. We can quote for several properties together and work between tenancies.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

Do you repair coloured baths?

Yes, we match coloured baths too. We tint the finish to your bath on site.

What areas do you cover?

Across the UK. Prices don’t change with location.

Do you hold any accreditations?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can you fix rust around the plughole?

Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.

Work for landlords and builders

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Looking after it afterwards

How the surface is treated afterwards matters. Here’s what we suggest:

  • Get a dripping tap fixed promptly
  • Clean with warm water and a mild detergent
  • Store metal items away from the bath
  • Don’t scrub with anything abrasive

Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.

Helland and the surrounding area

Helland is about 3 miles north of Bodmin, in Cornwall. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Helland is one of 644 places in Cornwall where we work.

All of PL30 is covered, from the main roads to the quietest streets. If you’re just outside Helland, we cover Longstone (2 miles north-west), St Mabyn (3 miles north-west), St Tudy (3 miles north), St Kew Highway (4 miles north-west) and Treveighan (5 miles north). Within a short drive, we also cover St Austell (12 miles south), Bodmin (3 miles south), Liskeard (12 miles east), Sandy Bottom (12 miles south), Addington (12 miles east) and Bethel (12 miles south).

Near you in Helland

Our customers here include homes close to Church of St Helena. The nearest railway station is Bodmin Parkway station, about 4.9 miles south-east of the centre. A little further out are Bodmin Hospital (3.1 miles south). Open spaces near Helland include Hawk's Tor.

Map of Helland © OpenStreetMap contributors

What we’re called out for in Helland

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.

Keep an eye out for any of the following:

  • Chips on the rim or sides
  • Rust spots around the plughole
  • Chips caused by builders
  • Impact holes in acrylic

What your quote should include

  • A fixed price, and whether VAT is included
  • How soon you can use it again
  • If travel is included in the price
  • How to look after the finish

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.