Essex · England
Bath chip & crack repair in Herongate, Essex
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Herongate. Free, fixed quotes from your pictures.
- Repairs from £95
- Deep scratches in acrylic
- A chip where the taps sit
Bath repair in Herongate, done in place
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can generally use the bath the next day. If you are dealing with holes from dropped items and chips on the rim or sides, we can usually put it right, whatever the material.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Herongate (CM13)
- County
- Essex
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we are called out for in Herongate
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
Typical reasons for a call-out include:
- Deep scratches in acrylic
- Snagging damage from a refit
- Rust spots around the plughole
- Chips under the taps
Comparing quotes
- How the room is protected while they work
- How to look after the finish
- What the guarantee covers, and for how long
- What happens if the damage is worse than the pictures show
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
How the visit works
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes two to three hours for most chips, depending on what we find, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Let the surface dry out before the visit
- Let us know if it has been repaired before
- Point us to the nearest place to park
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
Should you replace it?
Swapping a damaged bath for a new one generally means a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Prices start from £95. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Herongate
- Every repair guaranteed for a year
- Colour-matched on site
- No need to remove anything
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing or resurfacing vs replacement cost guide.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Also near Herongate
More services for Herongate
About Herongate
Herongate is about 3 miles south-east of Brentwood, in Essex. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover 644 places across Essex, from the larger towns to small villages. We work right across the region, from Herongate to London (20 miles away).
We work across CM13 and the streets around it. Streets in the area include Brentwood Road, Hernshaw and Cricketers Row, all of which we cover. Other places close to Herongate include East Horndon (1 mile south), Childerditch (2 miles south-west), West Horndon (2 miles south), Little Warley (2 miles south-west) and Bulphan (3 miles south). Larger places within reach include Chelmsford (11 miles north-east), Basildon (5 miles east), Brentwood (3 miles north-west), Canvey Island (11 miles south-east), Billericay (4 miles north-east) and Rayleigh (11 miles east).
Landmarks near Herongate
Around Herongate, we work in homes near St Andrew's Church, Green Man Inn and Brentwood County High School, among other places. For rail, the closest station is West Horndon station, about 2 miles south. Further afield, we also cover the area around Brentwood Community Hospital (2.4 miles north-west). Not far away are Thorndon Park.
Your questions about bath repair in Herongate
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Which areas do you work in?
All of Essex, and the rest of the UK. There is no extra charge for travel.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
How much does bath repair cost in Herongate?
Prices start from £95. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your CM13 postcode.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
I tried a repair kit. Can you fix it?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Can rust on a bath be repaired?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Stick to mild cleaners and a soft cloth
- Give the bath a quick rinse after use
- Get any new chip repaired before it rusts
- Ensure an acrylic bath is firm underfoot
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
Honest limits
We’ll always be straight with you, so here’s what a repair won’t do:
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we will give you a straight answer.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
