Lancashire · England
Bath Repair in High Bentham
We travel to High Bentham for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Impact holes in acrylic
- Chips under the taps
What affects the price in High Bentham
Prices start from £95. Every quote is fixed and free. What we take into account:
- How many items we do on one visit
- How many areas need work
- Whether old repairs or coatings need taking off
- The material and finish
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed price
We price nearly every job from photos. This is what we need:
- Any details about the material
- Any earlier repairs or coatings
- Natural light rather than flash
- A close-up of the damage, in focus
For a price in High Bentham, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Bath repair in High Bentham without replacing anything
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Typical jobs include a failed DIY repair that’s discoloured or lifting and damage done while the bathroom was being fitted, on whirlpool & spa baths, acrylic and pressed steel enamel.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- High Bentham (LA2)
- Area hub
- Lancashire
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
How the visit works
We agree an arrival time beforehand, so you are not left guessing. On site, it takes a morning or an afternoon. We leave the room clean.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
How to get a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Related advice
High Bentham: your questions answered
How invisible is a bath repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
How do I get a price for bath repair in High Bentham?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Lancashire.
Which areas do you work in?
We work UK-wide, and that includes High Bentham. Our prices are the same everywhere.
When to call us in High Bentham
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal lets water in, and rust follows.
These are the problems we are asked about most:
- Cracks in an acrylic bath
- A chipped rim or side
- A hole punched through by something heavy
- A failed DIY repair that’s discoloured or lifting
Comparing quotes
- Whether they match the colour on site
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the pictures show
- How long the guarantee is and what it covers
Repair or replace in High Bentham?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- We come to you, anywhere in the UK
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
See our full price list or resurfacing vs replacement cost guide.
Landlords, agents and businesses in High Bentham
We’re used to working with agents and managing companies. Send the address, photos and access details.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Where we work around High Bentham
High Bentham is about 13 miles north-east of Lancaster, in Lancashire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in all 482 towns and villages across Lancashire. Our nearest city page is Leeds, about 45 miles away.
We work across the LA2 postcode area. That includes homes on Main Street, Station Road and Grasmere Drive. High Bentham is on the B6480, which makes it straightforward to reach. We also cover the places around High Bentham: Low Bentham (1 mile west), Green (2 miles south-west), Burton in Lonsdale (2 miles north-west), Wennington (3 miles west) and Wrayton (4 miles north-west). Larger places within reach include Lancaster (13 miles south-west), Morecambe (14 miles west), Westfield War Memorial Village (13 miles west), Carnforth (10 miles west), Poulton-le-Sands (14 miles west) and Bare (14 miles west).
What’s near High Bentham
In High Bentham, that means homes near Bentham Community Primary School, Black Bull pub and St Margaret's Church, among other places. There is a railway station in High Bentham itself: Bentham station. Other landmarks nearby include Thurland Castle (4.2 miles north-west). Not far away are Constitutional.
Nearby places to High Bentham
More services for High Bentham
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Get a dripping tap fixed promptly
- Check that an acrylic bath doesn’t move when you stand in it
- Rinse the bath after use, especially in hard water areas
- Don’t leave razors or cans standing in the bath
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
