East Riding of Yorkshire · England
Bath Repair for High Hunsley homes
Fixed-price bath repair in High Hunsley and the surrounding area, normally in one visit.
- Repairs from £95
- Cracks in an acrylic bath
- Rusty patches near the plughole
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Bath repair in High Hunsley without replacing anything
Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We regularly repair acrylic, whirlpool & spa baths and roll-top & freestanding, and common reasons people get in touch are a failed DIY repair that’s discoloured or lifting and rusty patches near the plughole.
All our work comes with a one-year guarantee.
- Location
- High Hunsley (HU20)
- County
- East Riding of Yorkshire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in High Hunsley
Prices start from £95. There is no area surcharge for High Hunsley. What changes the price is:
- How easy the damage is to reach
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from pictures
We price nearly every job from photos. This is what we need:
- A coin or ruler next to the damage for scale
- One picture of the whole bath
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
If you are in High Hunsley and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
What we are called out for in High Hunsley
Rust generally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Typical reasons for a call-out include:
- Scratches you can feel with a fingernail
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
- Hairline or through cracks in acrylic
What to look for in a quote
- A fixed quote, and whether VAT is included
- Whether the price covers travel
- How long the guarantee is and what it covers
- How long it needs to cure
High Hunsley questions
What happens after I send pictures?
We come back with a fixed quote, normally with dates to choose from. You are under no obligation.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Will the repair show?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Can you repair several things at once?
Of course, and it normally saves money. Send pictures of everything together and we will quote them together.
Landlord and trade work in High Hunsley
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Towns and villages near High Hunsley
Also in High Hunsley
Should you replace it?
Swapping a damaged bath for a new one normally means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in one visit. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for High Hunsley. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- Rooms protected and left tidy
- Most jobs done in one visit
- A year’s guarantee on all work
- Free fixed quotes from pictures
See our prices page or bath cost comparison.
How to care for the repair
Most damage we see is avoidable. A few tips:
- Cover the bath during DIY or decorating
- Stick to mild cleaners and a soft cloth
- Do not leave razors or cans standing in the bath
- Give the bath a quick rinse after use
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
What we cannot put right
We will not take on work that will not last, so here’s what a repair can’t put right:
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we will say what we think.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
How it works
Here’s how a visit usually runs: we arrive on time, protect everything around the work area, do the job and tidy away. Allow a morning or an afternoon. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the day after, the bath is ready to use.
Before we arrive
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
- Let the surface dry out before the visit
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Our work in High Hunsley
High Hunsley is about 6 miles south-west of Beverley, in East Riding of Yorkshire. Our technicians come to customers in High Hunsley and the surrounding area, so nothing has to leave your home. We work in all 299 towns and villages across East Riding of Yorkshire. We work right across the region, from High Hunsley to Leeds (about 41 miles away).
Jobs in HU20 work the same way as everywhere else we cover. Close by, we cover Little Weighton (2 miles south-east), Rowley (2 miles south-east), Drewton (2 miles south-west), South Newbald (3 miles west) and North Newbald (3 miles west). Within a short drive, we also cover Beverley (6 miles north-east), Driffield (15 miles north), Goole (15 miles south-west), Pocklington (13 miles north-west), Hessle (7 miles south-east) and Cottingham (6 miles east).
Around High Hunsley
Nearby you will also find Cave Castle (3.5 miles south-west) and Broadgate Hospital (4.2 miles east). For a walk, there is North Cave Wetlands.
- Other local spots include Humberside (2.2 miles east)
About our accreditations · Every repair comes with a one-year guarantee.
