Gloucestershire · England
Bath Repair in High Woolaston
Bath repair across High Woolaston and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Scuffs and scratches in the surface
- A failed DIY repair that is discoloured or lifting
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Bath repair in High Woolaston without replacing anything
A damaged bath does not have to mean a new bathroom. Our technicians fill, shape and refinish the damage, with the colour mixed on site. We are often asked to fix an old repair that has yellowed or come loose and damage done while the bathroom was being fitted, in pressed steel enamel, roll-top & freestanding and acrylic.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- High Woolaston (GL15)
- Region
- Gloucestershire
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near High Woolaston
Also in High Woolaston
When to call us in High Woolaston
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Keep an eye out for these signs:
- Hairline or through cracks in acrylic
- Scratches you can feel with a fingernail
- Damage beneath the taps
- Snagging damage from a refit
Questions to ask before you book
- What aftercare is recommended
- How the room is protected while they work
- Whether the price covers travel
- The length of the guarantee and what it covers
FAQs for High Woolaston
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can you redo an old repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Landlords, agents and businesses in High Woolaston
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around High Woolaston, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
Our work in High Woolaston
High Woolaston is about 5 miles north-east of Chepstow, in Gloucestershire. Anywhere in GL15, we carry out the work at your property. High Woolaston is one of 470 places in Gloucestershire where we work. Our jobs stretch from High Woolaston to Birmingham (62 miles away).
We work across GL15. We also cover the places around High Woolaston: Stroat (1 mile south-west), Tidenham Chase (2 miles west), Boughspring (2 miles south-west), Netherhope (3 miles south-west) and Tintern (3 miles west). Larger places within reach include Lydney (4 miles north-east), Cam (10 miles east), Stonehouse (14 miles east), Dursley (11 miles east), Cinderford (10 miles north-east) and Coleford (7 miles north).
Near you in High Woolaston
Our clients here include homes close to Woolaston Primary School, East Wood and Church of St Andrew and the streets around them. The nearest railway station is Lydney station, roughly 3.7 miles north-east of the centre. Nearby you’ll also find Lydney Park Museum (3 miles north-east) and Little Camp Hill (2.9 miles north-east). The countryside around High Woolaston includes Beddick Hill and Ridley Bottom.
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Check that an acrylic bath does not move when you stand in it
- Get a dripping tap fixed promptly
- Clean with warm water and a mild detergent
- Rinse the bath after use, especially in hard water areas
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Our bath repair starts from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why us?
- Technicians who travel to you, UK-wide
- One visit for most repairs
- Same prices wherever you are
- A year’s guarantee on all work
Read our prices page and guide to resurfacing and replacement costs.
When a repair isn’t the answer
A repair isn’t right for every job, including:
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in High Woolaston
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes two to three hours for most chips. We clean up when we’re done and tell you when it’s ready to use.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the next day.
Before we arrive
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
