Monmouthshire · Wales
Bath Repair for Stroat homes
We travel to Stroat for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A chip where the taps sit
- Impact holes in acrylic
About our bath repair in Stroat
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. We work on cast iron enamel, roll-top & freestanding and acrylic, and the jobs we see most are deep scratches in acrylic and a chip where the taps sit.
All of our repairs are guaranteed for twelve months in Stroat and everywhere else. We return to put right any problem with the work.
- Where
- Stroat (NP16)
- Area hub
- Monmouthshire
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When we would advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
- Wear across the entire surface, which needs re-enamelling
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Repair or replace: which is better?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- Repair technicians who travel to you, UK-wide
- We will tell you if it’s not worth repairing
- Rooms protected and left tidy
- No need to remove anything
Take a look at our full price list and bath cost comparison.
Keeping it looking good
So the finish stays in good condition:
- Do not leave razors or cans standing in the bath
- Have new chips seen to early
- A dripping tap stains enamel, so fix it early
- Rinse the bath after use, especially in hard water areas
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
Towns and villages near Stroat
Other services in Stroat
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Questions from Stroat
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Do you work in Stroat?
Yes, we do. Technicians travel to Stroat from across the region, with no extra charge for travel.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
How invisible is a bath repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
What happens on the day
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a few hours, depending on the damage in most cases. The room is left tidy and you’ll know when it can be used.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Preparing for the visit
- Let us know if it has been repaired before
- Make sure the room can be ventilated
- Let us know about parking or access
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Covering Stroat
Stroat is about 3 miles north-east of Chepstow, in Monmouthshire. We travel to customers in Stroat and nearby villages, so nothing has to leave your home. Our repair technicians cover 115 places across Monmouthshire, from the larger towns to small villages. Our jobs stretch from Stroat to Birmingham (63 miles away).
All of NP16 is covered, from the main roads to the quietest streets. If you are just outside Stroat, we cover Boughspring (1 mile south-west), Tidenham Chase (1 mile north-west), Netherhope (1 mile south-west), High Woolaston (1 mile north-east) and Woodcroft (2 miles south-west). Further out, we also cover Chepstow (3 miles south-west), Monmouth (10 miles north-west), Cil-y-coed (8 miles south-west), Bulwark (4 miles south-west), Overmonnow (10 miles north-west) and Gwndy (10 miles south-west).
Local landmarks in Stroat
In Stroat, that means homes near Saint Michael & All Angels and East Wood. For rail, the closest station is Chepstow station, about 3.1 miles south-west of the centre. Nearby you will also find Chepstow Community Hospital (3.5 miles south-west) and High Woolaston (1.1 miles north-east). For a walk, there’s Linen Well and Ridley Bottom.
What affects the price in Stroat
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- Where the damage is and how we get to it
The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- One sharp close-up of the damage
- A picture taken from further back
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Do you need bath repair in Stroat?
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
Contact us if you’ve noticed:
- Rusty patches near the plughole
- Chips under the taps
- Chips caused by builders
- Hairline or through cracks in acrylic
Before booking anyone
- How long the guarantee is and what it covers
- Aftercare advice
- What happens if the damage is worse than the pictures show
- Whether a trained technician does the job
About our accreditations · Every repair comes with a one-year guarantee.
