Worcestershire · England
Bath Repair in Hillhampton
Our repair technicians come to Hillhampton for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips along the edge of the bath
- A failed DIY repair that is discoloured or lifting
Prices and what affects them
Repairs from £95. We do not charge extra for travel to Hillhampton. The price depends on:
- The type of damage
- How much damage there is
- Previous DIY repairs that have to come out
- The colour and finish to match
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your pictures
Phone photos are fine, there’s no need for anything special. Just make sure we can see:
- A picture taken from further back
- Natural light rather than flash
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
If you’re in Hillhampton and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Bath repair in Hillhampton, done in place
Most of our bath repairs take a few hours, and you can normally bathe again the day after. There is no need to book a plumber or tiler, because nothing is disconnected. We’re frequently asked to fix rust spots around the plughole and a failed DIY repair that’s discoloured or lifting, across pressed steel enamel, whirlpool & spa baths and roll-top & freestanding.
All our work comes with a one-year guarantee, wherever you are in Worcestershire.
- Area
- Hillhampton (WR6)
- County
- Worcestershire
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Hillhampton
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Aftercare tips
Aftercare is simple:
- If an acrylic bath flexes, have its feet adjusted
- Use a soft cloth and washing-up liquid for everyday cleaning
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Where we work around Hillhampton
Hillhampton is about 4 miles south-west of Stourport-on-Severn, in Worcestershire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover 376 places across Worcestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 22 miles away.
All of WR6 is covered, from the main roads to the quietest streets. We also cover the places around Hillhampton: Great Witley (1 mile west), Little Witley (2 miles south), Ockeridge (2 miles south), Holt (2 miles south-east) and Hill Side (3 miles south-west). Larger places within reach include Worcester (8 miles south-east), Kidderminster (7 miles north-east), Bromsgrove (12 miles east), Great Malvern (12 miles south), Droitwich Spa (8 miles east) and Stourport-on-Severn (4 miles north-east).
Landmarks near Hillhampton
Our customers here include homes close to Church of St Michael, among other places. A little further out are Olivers Mound Castle (2.2 miles east). For a walk, there is Abberley Hill.
Repairing versus replacing in Hillhampton
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. A repair keeps it in place. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Colour-matched on site
- Every repair guaranteed for a year
- Work done at your home or business
Take a look at our prices page and bath cost comparison.
Also near Hillhampton
What else we do in Hillhampton
How the visit works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take a few hours, depending on the damage, including clearing up.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
- Mention any earlier repairs or resurfacing
Getting a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Read more
Do you need bath repair in Hillhampton?
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Most people contact us after spotting one of these:
- Rusty patches near the plughole
- A cracked acrylic bath
- Scuffs and scratches in the surface
- Impact holes in acrylic
Before you book anyone
- Whether there are any call-out or travel charges
- What aftercare is recommended
- Who will actually do the work
- What protection goes down before work starts
Hillhampton questions
When can I have a bath again?
Usually the next day. We confirm the time before we leave.
What happens next?
We come back with a fixed price, plus dates. There’s no obligation to book.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Do you cover Hillhampton?
We do. Repair technicians travel to Hillhampton from across the region, with no extra charge for travel.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
About our accreditations · Every repair comes with a one-year guarantee.
