Worcestershire · England
Bath re-enamelling & resurfacing in Hillhampton, Worcestershire
Damaged bath in Hillhampton? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Lots of chips and rust spots
Bath re-enamelling in Hillhampton without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. There’s no removal, plumbing or tiling involved. Whether it’s a roll-top that’s seen better days and brown or grey marks that don’t clean off, we can typically put it right, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Hillhampton (WR6)
- Area hub
- Worcestershire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- One-year guarantee on every repair
- Everything repaired in place
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
See our prices page and bath cost comparison.
Common problems we fix in Hillhampton
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Keep an eye out for these signs:
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough
- Brown or grey marks that do not clean off
- Wear marks under the taps
What to look for in a quote
- The length of the guarantee and what it covers
- What protection goes down before work starts
- Whether they match the colour on site
- What aftercare is recommended
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Aftercare tips
It’s all simple stuff:
- Do not leave bottles, razors or sponges standing on the surface
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs immediately
- A dripping tap should be fixed promptly
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job, from your pictures. The main factors are:
- How hard the colour is to match
- The material and finish
- Previous DIY repairs that have to come out
- Doing more than one item at once
We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
You can take the pictures on your phone, there’s no need for anything special. Just make sure we can see:
- Natural light rather than flash
- Whether it’s been repaired or coated before
- Where you are, by postcode
- One sharp close-up of the damage
Upload a photo of the damage and a wider shot of the whole item, with your WR6 postcode, and we will reply with a fixed quote.
Nearby places to Hillhampton
What else we do in Hillhampton
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For anyone letting property in or around Hillhampton, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
How it works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We tidy up before we leave and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Let us know if it has been repaired before
- Make sure the area is dry
- Point us to the nearest place to park
Get a quote
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
When we would advise against a repair
A repair is not right for every job, including:
- A cast iron or steel bath that’s cracked right through
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we will say what we think.
What we work on
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Covering Hillhampton
Hillhampton is about 4 miles south-west of Stourport-on-Severn, in Worcestershire. Wherever you are in the WR6 postcode area, we carry out the work at your property. We cover all 376 towns and villages across Worcestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 22 miles away.
Jobs in WR6 work the same way as everywhere else we cover. If you’re just outside Hillhampton, we cover Great Witley (1 mile west), Little Witley (2 miles south), Ockeridge (2 miles south), Holt (2 miles south-east) and Hill Side (3 miles south-west). Within a short drive, we also cover Worcester (8 miles south-east), Kidderminster (7 miles north-east), Bromsgrove (12 miles east), Great Malvern (12 miles south), Droitwich Spa (8 miles east) and Stourport-on-Severn (4 miles north-east).
Landmarks near Hillhampton
Our clients here include homes close to Church of St Michael and the streets around them. Well-known places in the area include Olivers Mound Castle (2.2 miles east). The countryside around Hillhampton includes Abberley Hill.
Questions from Hillhampton
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Will the new finish last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Do you come to Hillhampton?
Yes. We work across the UK and travel to Hillhampton. Send us photos for a fixed quote, or call 0345 017 0787.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
About our accreditations · Every repair comes with a one-year guarantee.
