Oxfordshire · England

Bath chip & crack repair in Hinksey Hill, Oxfordshire

Local bath repair for Hinksey Hill: photo quotes, tidy work and a year’s guarantee.

Repairs from £95
Scratches you can feel with a fingernail
Chips caused by builders

Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Hinksey Hill

Call 0345 017 0787

Get a free quote

Aftercare tips

Nothing complicated is needed:

Ensure an acrylic bath is firm underfoot
Don’t leave razors or cans standing in the bath
Avoid scourers, wire wool and gritty cream cleaners
Get any new chip repaired before it rusts

Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.

About our bath repair in Hinksey Hill

We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. Most baths can be used again the following day. We regularly repair whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and people most frequently call us about deep scratches in acrylic and a kit repair that didn’t last.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.

Acrylic bath corner rebuilt by Surface Doctor, before and after

Area: Hinksey Hill (OX1)
Region: Oxfordshire
Warranty: A year, on every repair
Price: From £95. Fixed and free, based on photos
Telephone: 0345 017 0787
Last updated: 23 October 2026

Hinksey Hill questions

Will the price change on the day?

The price is fixed for what the photos show. If there is more, we will tell you before starting.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

What does bath repair cost?

Repairs from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

When can you do it?

It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.

What information do you need?

Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.

Should you replace it?

Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair deals only with the damage in one visit. Prices start from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Why Hinksey Hill customers choose us

Colours mixed by hand to suit your surface
One visit for most repairs
Free fixed quotes from pictures
Honest advice, even when it means no job

See our pricing or resurfacing vs replacement cost guide.

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

How it works

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, depending on what we find, and we finish by cleaning up and talking you through the result.

First, the area is cleaned and any loose enamel or rust is removed.
The chip or crack is filled, then sanded level with the bath.
The colour is mixed on the spot to match your bath.
We build up the finish and polish it into the surrounding enamel.
Once it has cured, usually by the following day, the bath is ready to use.

Getting ready for the visit

Clear toiletries, mats and anything else from around the area
Let us know if it has been repaired before
Ensure the room can be ventilated

Getting a price

Upload a picture of the damage and a wider shot of the whole item, with your OX1 postcode, and we’ll come back with a fixed quote.

Get a free quote

Related advice

What your bath is made of matters

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.

How we price bath repair

Prices start from £95. There’s no area surcharge for Hinksey Hill. The price reflects:

How much damage there is
The material and finish
Where the damage is and how we get to it
Previous DIY repairs that have to come out

A repair is priced on what needs doing, not where you live. The full price is agreed before you book.

Getting a price from photos

Photographing the damage takes a minute, and it saves a visit. Please include:

A coin beside the damage so we can judge size
Whether it’s been repaired or coated before
One sharp close-up of the damage
Any details about the material

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you’re under no obligation.

About Hinksey Hill

Hinksey Hill is about 2 miles south-west of Oxford, in Oxfordshire. Our technicians come to clients in Hinksey Hill and the surrounding area, so nothing has to leave your home. Our technicians cover 443 places across Oxfordshire. We work right across the region, from Hinksey Hill to London (about 53 miles away).

Here we cover the OX1 postcode area. Whether you live on Betty Lane, Badger Lane and Hinksey Hill or a nearby road, a technician can come to you. Neighbouring places we cover include South Hinksey (1 mile north), Redbridge (1 mile east), Chilswell (1 mile west), New Hinksey (1 mile north-east) and Bayworth (1 mile south-west). Larger places within reach include Didcot (8 miles south), Bicester (13 miles north), Abingdon-on-Thames (3 miles south), Witney (11 miles north-west), Carterton (14 miles west) and Thame (13 miles east).

Near you in Hinksey Hill

Locally, our jobs take us to homes close to New Hinksey Church of England Primary School, The General Elliot pub and Greyfriars Catholic School. Other local landmarks include Alexander Library of Ornithology (2 miles north-east), Raleigh Park (1.6 miles north-west) and Church of St Lawrence (0.5 miles north). Hinksey Hill’s nearest station is Oxford station, roughly 2 miles north. Further afield, we also cover the area around The Story Museum (1.8 miles north) and Westgate Shopping Centre (1.8 miles north). For a walk, there’s Lashford Lane Fen and Harcourt Hill.

Do you need bath repair in Hinksey Hill?

Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal will start to rust.

Clients normally contact us about: